The Mazak VTC-300C is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. a top spindle speed of 0 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Mazak VTC-300C: fixed-table vertical machining center, 2000 x 760 mm table, 1670 x 760 x 660 mm travels, CAT No.40, 24 tools. Checked against Mazak.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Mazak (Japan) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | CAT No.40 |
| Table / Platter / Chuck Size | 2000 mm × 760 mm |
| Automatic Tool Changer (ATC) | 24 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Table Size | 2000 mm × 760 mm |
| Spindle Taper | CAT No.40 |
| Spindle Motor 10min Rating | 22 kW (30 HP) (10 min. Rating) |
| Tool Capacity | 24 tools |
| X-Axis Travel | 1670 mm |
| Y-Axis Travel | 760 mm |
| Z-Axis Travel | 660 mm |
Our best estimate for the Mazak VTC-300C is $200,000 - $280,000. This is an estimate for a vertical machining centers (vmc) in this class, not a quote from Yamazaki Mazak; configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/mazak-vtc-300c#price; the request is passed to Yamazaki Mazak or an authorised dealer.
Mazak lists a 2000 mm × 760 mm table with travels of 1670 mm in X, 760 mm in Y and 660 mm in Z. Y travel equals the table depth. X travel is shorter than the table, so the ends of the table are clamping or overhang space.
Mazak lists the spindle motor at 22 kW (30 HP) on a ten-minute rating, with CAT No.40 tooling. A ten-minute rating is an intermittent figure, so it is not the power available for continuous cutting. The table gives no continuous rating, no torque and no maximum speed for this model.
The magazine holds 24 tools with CAT No.40 shanks. For comparison, the VTC-800/30SR carries 30 tools. If a job family needs more than 24 tools, plan for tool changes between jobs, or ask Mazak whether a larger magazine is offered.
Mazak describes the long table of the VTC series as a substitute for a two-pallet changer, with multiple-part setups along its length. The optional center partition that formally divides the work area is described for the VTC-530/20. Whether it is offered on the VTC-300C is not stated, so raise it with Mazak.
Mazak states that the fixed table of the VTC series allows robots and hydraulic fixtures to be installed easily, and that table access is good through wide openings. Since the table does not move, fixture hoses and a robot's reach stay in one place during the cycle.
