The DMG MORI CMX 600 V is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the SIEMENS, HEIDENHAIN or FANUC. and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
DMG MORI CMX 600 V vertical machining center: 600 x 560 x 510 mm travels, 35.4 x 22.0 in table, 600 kg (1,322.8 lb) load, 6 µm positioning.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | DMG MORI (Germany / Japan) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | SIEMENS, HEIDENHAIN or FANUC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Table / Platter / Chuck Size | 35.4 x 22.0 in |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Max Workpiece Length | 900 mm (35.4 in) |
| Max Workpiece Width | 560 mm (22 in) |
| Max Workpiece Height | 630 mm (24.8 in) |
| Max Workpiece Weight | 600 kg (1,322.8 lb) |
| X-Axis Travel | 600 mm (23.6 in) |
| Y-Axis Travel | 560 mm (22 in) |
| Z-Axis Travel | 510 mm (20.1 in) |
| CNC Control | SIEMENS, HEIDENHAIN or FANUC |
| Table Size | 35.4 x 22.0 in |
| Positioning Accuracy | 6 µm in all axes without linear scales (ISO 230-2) |
| Footprint | 63.5 ft² |
According to secondary market equipment benchmarks for November 2026, the DMG MORI CMX 600 V is estimated between $53,000 and $92,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $822 / month.
600 mm (23.6 in) in X, 560 mm (22 in) in Y and 510 mm (20.1 in) in Z. Y and Z are the same across the series: the CMX 800 has 800 mm (31.5 in) of X and the CMX 1100 has 1,100 mm (43.3 in), both with 560 mm (22 in) of Y and 510 mm (20.1 in) of Z.
Up to 900 mm (35.4 in) long, 560 mm (22 in) wide and 630 mm (24.8 in) high, and up to 600 kg (1,322.8 lb). The X travel is 600 mm (23.6 in), so a 900 mm part is not reachable over its whole length in one setup. The maximum height is also greater than the 510 mm (20.1 in) of Z travel.
DMG MORI states an accuracy of positioning in all axes of 6 µm according to ISO 230-2, without linear scales. It also lists thermal compensation and ball-screws made in the first class of tolerances (IT 1).
SIEMENS, HEIDENHAIN or FANUC. The SIEMENS and HEIDENHAIN versions use a 19 in DMG MORI SLIMline multi-touch control panel. The FANUC version uses a 15 in SLIMline panel with MAPPS, which DMG MORI describes as giving 3D simulation with contour verification.
The travels are close. The CMX 600 V has 600 mm (23.6 in) of X, 560 mm (22 in) of Y and 510 mm (20.1 in) of Z. The DMV 60 has 600 mm (23.6 in) in both X and Y, and the same 510 mm (20.1 in) of Z. On the CMX 600 V the table is the moving X axis.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.