The DMG MORI CMX 90 U is an industrial-grade 5-Axis Machining Centers powered by the CELOS X with Fanuc 31i-B5 or Siemens 840D sl. a top spindle speed of 12,000 RPM, and a 5-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
DMG MORI CMX 90 U: 5-axis machining center, 900 x 700 x 580 mm travels, 750 mm table, 400 kg load, 12,000 rpm spindle with 120 Nm. Listed figures.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | DMG MORI (Germany / Japan) |
| Machine Type | 5-Axis Machining Centers |
| CNC Controller System | CELOS X with Fanuc 31i-B5 or Siemens 840D sl |
| Number of Controlled Axes | 5-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 12,000 RPM |
| Spindle Motor Rating | 22.0 kW |
| Spindle Taper Interface | CAT 40 / BBT 40 |
| Max Table Load Capacity | 400 kg |
| Automatic Tool Changer (ATC) | 30 Tool Stations |
| Approx. Machine Weight | 9,500 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X-Axis Travel | 900 mm (35.4 in) |
| Y-Axis Travel | 700 mm (27.6 in) |
| Z-Axis Travel | 580 mm (22.8 in) |
| A Axis Swivel | -35 to +110 deg |
| C Axis Rotation | 360 deg continuous |
| Max Spindle Speed | 12,000 RPM (15,000 RPM optional) |
| Spindle Taper | CAT 40 / BBT 40 |
| Spindle Motor Power | 22 kW (30 hp) |
| Spindle Torque | 120 Nm (88 ft-lb) |
| Tool Capacity | 30 tools standard (60, 120 optional) |
| Tool Change Time | 3.0 sec tool-to-tool |
| Table Diameter | 750 mm (29.5 in) |
| Max Table Load | 400 kg (882 lb) |
| Max Workpiece Diameter | 800 mm (31.5 in) |
| Max Workpiece Height | 500 mm (19.7 in) |
| Rapid Traverse | 30 m/min (1,181 ipm) |
| Machine Weight | 9,500 kg (20,944 lb) |
| CNC Control | CELOS X with Fanuc 31i-B5 or Siemens 840D sl |
According to secondary market equipment benchmarks for November 2026, the DMG MORI CMX 90 U is estimated between $121,500 and $250,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $1,883 / month.
The listed maximum workpiece is 800 mm (31.5 in) in diameter and 500 mm (19.7 in) high, on a 750 mm (29.5 in) table rated for 400 kg (882 lb). Travels are 900 mm (35.4 in) in X, 700 mm (27.6 in) in Y and 580 mm (22.8 in) in Z, which leaves room around the part for angled tools.
The listed spindle runs at 12,000 rpm with 22 kW (30 hp) and 120 Nm (88 ft-lb), with 15,000 rpm as an option. The taper is given as CAT 40 / BBT 40. On a used machine, check which speed was ordered before planning small-tool work.
The A axis swivels from -35 to +110 deg and the C axis rotates 360 deg continuously. That range lets the tool reach the sides of a part and faces tilted past vertical, while the continuous C axis allows a part to be worked all the way round without unwinding.
30 tools as standard, with 60-tool and 120-tool magazines listed as options. The tool change takes 3.0 sec tool-to-tool. Since the larger magazines were options, the number on any one machine has to be confirmed by looking at it.
They share 900 mm (35.4 in) of X travel and little else. The DMC 90 u duoBLOCK has 1,050 mm (41.3 in) of Y and 850 mm (33.5 in) of Z and carries workpieces up to 1,400 kg (3,086.5 lb) and 1,450 mm (57.1 in) tall. The CMX 90 U has 700 mm (27.6 in) of Y, 580 mm (22.8 in) of Z and a 400 kg (882 lb) table load.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.