The DMG MORI CTX 450 is an industrial-grade CNC Lathes & Turning Centers powered by the Standard CNC. a top spindle speed of 4,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
DMG MORI CTX 450 universal lathe: 480 mm (18.9 in) max diameter, 800 mm turning length, ±65 mm Y-axis, 25 / 32 kW ISM80 spindle at 4,000 rpm.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | DMG MORI (Germany / Japan) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 4,000 RPM |
| Spindle Motor Rating | 25.0 kW |
| Spindle Taper Interface | Standard |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X-Axis Travel | 310 mm (12.2 in) |
| Y-Axis Travel | 130 mm (5.1 in) |
| Z-Axis Travel | 825 mm (32.5 in) |
| Max Workpiece Diameter | 480 mm (18.9 in) |
| Max Workpiece Length | 800 mm (31.5 in) |
| Max Bar Capacity | 102 mm (4 in) |
| Spindle Motor Power | 25 / 32 kW (100/40% DC) |
| Spindle Nose | A2-8 |
| Max Spindle Speed | 4,000 rpm (main spindle ISM80) |
| Driven Tool Speed | Up to 10,000 rpm (optional DirectDrive turret drive) |
| Spindle Bore | Ø 80 mm (hollow cylinder, ISM80) |
| Sub Spindle Speed | 5,500 rpm (counter spindle ISM 65) |
| Sub Spindle Power | 13/14 kW (100%-40%ED), counter spindle ISM 65 |
| Driven Tool Power | 10/11 kW (100%-40%ED), optional DirectDrive turret drive |
| Coolant Pressure | Turrets ready for 50 bar coolant pressure |
According to secondary market equipment benchmarks for November 2026, the DMG MORI CTX 450 is estimated between $49,000 and $96,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $760 / month.
The Highlights describe the main spindle as an A2-8 integrated spindle, type ISM80, with a hollow cylinder of Ø 80 mm, a drive rating of 25 / 32 kW (100 / 40% duty cycle) and 4,000 rpm. The motor is water-cooled, and the C-axis is controlled by a measuring system on the front bearings.
DMG MORI's table lists a bar capacity of 102 mm (4 in). The main spindle in the Highlights, the ISM80, has a hollow cylinder of Ø 80 mm, which is smaller than that. If bar capacity decides the purchase, have the spindle and its bore stated in the quotation.
Yes. Y travel is 130 mm (5.1 in), described by DMG MORI as a ±65 mm stroke. Direct measuring systems in the X-axis and Y-axis are standard. That stroke covers keyways, flats and off-centre holes on parts up to the 480 mm (18.9 in) maximum diameter, within 65 mm of the centreline.
An ISM 65 integrated spindle motor, partially hollow at Ø 65 mm, with a rating of 13/14 kW and 5,500 rpm. DMG MORI presents it with a star turret for complete machining. Check the quotation to see whether both are included in the machine offered.
In length. Both have 310 mm (12.2 in) of X travel and 130 mm (5.1 in) of Y travel and take 480 mm (18.9 in) in diameter. The CTX 450 has 825 mm (32.5 in) of Z travel and an 800 mm (31.5 in) maximum workpiece length; the CTX 550 has 1,225 mm (48.2 in) of Z travel.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.