The DMG MORI DMC 80 u FD duoBLOCK is an industrial-grade 5-Axis Machining Centers powered by the Standard CNC. and a 5-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
DMG MORI DMC 80 u FD duoBLOCK: 5-axis mill-turn, DirectDrive table up to 800 rpm, 800 x 1,050 x 850 mm travels, parts to 900 mm and 1,400 kg.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | DMG MORI (Germany / Japan) |
| Machine Type | 5-Axis Machining Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 5-Axis Simultaneous / Positioning |
| Spindle Motor Rating | 103.3 kW |
| Spindle Taper Interface | Standard |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Max Workpiece Diameter | 900 mm (35.4 in) |
| Max Workpiece Height | 1,450 mm (57.1 in) |
| Max Workpiece Weight | 1,400 kg (3,086.5 lb) |
| X-Axis Travel | 800 mm (31.5 in) |
| Y-Axis Travel | 1,050 mm (41.3 in) |
| Z-Axis Travel | 850 mm (33.5 in) |
| Spindle Torque | 737.6 ft lb (powerMASTER motorspindle); 958.8 ft lb (5X torqueMASTER) |
| Spindle Motor Power | 103.3 hp (powerMASTER motorspindle); 49.6 hp (5X torqueMASTER) |
| Table Speed | Up to 800 rpm (DirectDrive table) |
| Tool Magazine | Wheel magazine with 453 tool pockets; tool replenishment time max. 5.6 sec |
| Pallet Changer | Rotating pallet changer as standard |
According to secondary market equipment benchmarks for November 2026, the DMG MORI DMC 80 u FD duoBLOCK is estimated between $134,500 and $273,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $2,085 / month.
The DirectDrive table reaches rotational speeds up to 800 rpm, which DMG MORI lists for milling and turning in one setup. The speed that can be used on a given job depends on the weight and balance of the part and fixture. No table torque is stated in the Highlights.
Workpieces up to 900 mm (35.4 in) in diameter, 1,450 mm (57.1 in) in height and 1,400 kg (3,086.5 lb). The linear travels are 800 mm (31.5 in) in X, 1,050 mm (41.3 in) in Y and 850 mm (33.5 in) in Z. The height limit is greater than the Z travel, so check tool reach along the full length of a tall part.
DMG MORI lists grinding as an integrated technology on this machine, with surface quality as its purpose. The Highlights do not describe the wheels, dressing or measuring equipment involved, so those details need to come from the quotation.
Two are named. The powerMASTER motorspindle has 737.6 ft lb and 103.3 hp, and the 5X torqueMASTER has 958.8 ft lb and 49.6 hp. The torqueMASTER gives 30% more torque, the powerMASTER roughly twice the power. Speed ranges are not listed.
Both have travels of 800 × 1,050 × 850 mm (31.5 × 41.3 × 33.5 in) and the same workpiece limits. DMG MORI describes the machine as also available in a mill-turn version, in which a DirectDrive table at rotational speeds up to 800 rpm allows milling and turning in one setup. That turning table is the difference to ask about when comparing quotations.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.