The DMG MORI DMC 85 h FD monoBLOCK is an industrial-grade CNC Horizontal Machining Centers (HMC) powered by the Standard CNC. and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
DMG MORI DMC 85 h FD monoBLOCK: 850 x 1,150 x 900 mm travels, parts to 830 mm diameter and 800 kg, double pallet changer, HSK-A100 option.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | DMG MORI (Germany / Japan) |
| Machine Type | CNC Horizontal Machining Centers (HMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Max Workpiece Diameter | 830 mm (32.7 in) |
| Max Workpiece Height | 900 mm (35.4 in) |
| Max Workpiece Weight | 800 kg (1,763.7 lb) |
| X-Axis Travel | 850 mm (33.5 in) |
| Y-Axis Travel | 1,150 mm (45.3 in) |
| Z-Axis Travel | 900 mm (35.4 in) |
| Pallet Changer | Double pallet changer |
| Mill Turn Speed | Up to 800 rpm (mill-turn variant) |
| Max Tool Diameter | Up to 11 in. (with HSK-A100 tool holder) |
| Max Tool Weight | Up to 66.15 lbs. (with HSK-A100 tool holder) |
| Long Term Accuracy | Up to 0.0002 in. |
| Bed Construction | One-piece cast iron machine bed with 3-point support |
According to secondary market equipment benchmarks for November 2026, the DMG MORI DMC 85 h FD monoBLOCK is estimated between $104,000 and $208,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $1,612 / month.
800 kg (1,763.7 lb) according to the technical data. The Highlights give the swivel rotary table as suited to components up to 1,764 lbs., which is the same limit. The part may be up to 830 mm (32.7 in) in diameter and 900 mm (35.4 in) high.
Up to 800 rpm. DMG MORI does not publish the turning torque or power in the Highlights. At 800 rpm the cutting speed falls off on small diameters, so the turning side suits large-diameter features best; check the figure against the smallest diameter you need to turn.
DMG MORI states that the machine is also available with an HSK-A100 tool holder for tools up to 11 in. in diameter and 66.15 lbs. The tool limits of the base interface and the capacity of the tool magazine are not given in the Highlights.
The DMC 85 FD monoBLOCK is listed with travels of 935 mm (36.8 in) in X, 850 mm (33.5 in) in Y and 650 mm (25.6 in) in Z. The DMC 85 h FD monoBLOCK has 850 mm (33.5 in), 1,150 mm (45.3 in) and 900 mm (35.4 in), so it is shorter in X but longer in Y and Z, and it machines horizontally with a double pallet changer.
The DMC 65 h FD monoBLOCK, with travels of 650 mm (25.6 in) in X, 950 mm (37.4 in) in Y and 700 mm (27.6 in) in Z. Against it the DMC 85 h FD monoBLOCK is longer in every axis: 850 mm (33.5 in), 1,150 mm (45.3 in) and 900 mm (35.4 in).
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.