The DMG MORI DMF 360 Linear is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Siemens 840D sl / Heidenhain TNC 640. and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
DMG MORI DMF 360 Linear: listed 3,600 x 1,000 x 800 mm travels, linear motors, 15,000 rpm 35 kW spindle. Not in the current lineup; figures unconfirmed.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | DMG MORI (Germany / Japan) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Siemens 840D sl / Heidenhain TNC 640 |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel Mm | 3600 |
| Y Axis Travel Mm | 1000 |
| Z Axis Travel Mm | 800 |
| Table Size Mm | 3600 × 1000 |
| Max Table Load Kg | 5000 |
| Spindle Speed Rpm | 15000 |
| Spindle Power Kw | 35 |
| Spindle Torque Nm | 255 |
| Rapid Traverse M Min | 80 |
| Tool Storage Capacity | 60 |
| Max Tool Diameter Mm | 125 |
| Max Tool Length Mm | 400 |
| Max Tool Weight Kg | 8 |
| Positioning Accuracy Mm | 0.006 |
| Repeatability Mm | 0.004 |
| Drive Type | Linear motors (X/Y/Z) |
| CNC Control | Siemens 840D sl / Heidenhain TNC 640 |
| Machine Weight Kg | 35000 |
According to secondary market equipment benchmarks for November 2026, the DMG MORI DMF 360 Linear is estimated between $49,500 and $87,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $767 / month.
It is not in the current lineup and may be an older model. The figures listed on this page are unconfirmed, so for a specific machine rely on its documentation, nameplate and an inspection.
The listed travels are 3,600 mm in X, 1,000 mm in Y and 800 mm in Z. The table is listed at 3,600 × 1,000 mm with a maximum load of 5,000 kg. These figures are unconfirmed.
A spindle with 15,000 rpm, 35 kW and 255 Nm. The speed and the moderate torque point to high-speed milling of light alloys and to finishing work, not to heavy roughing. The listed tool storage holds 60 tools.
The listed drive type is linear motors in X, Y and Z. A linear motor drives the axis directly, with no ballscrew in between, which fits the listed rapid traverse of 80 m/min over 3,600 mm of X travel.
Siemens 840D sl or Heidenhain TNC 640. On a used machine, confirm which of the two is fitted and its software level, since that decides which programs and post-processors can be used.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.