The DMG MORI DMU 100 P duoBLOCK is an industrial-grade 5-Axis Machining Centers powered by the Standard CNC. and a 5-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
DMG MORI DMU 100 P duoBLOCK: 5-axis, 1,000 x 1,250 x 1,000 mm travels, parts to 1,600 mm tall and 2,200 kg, spindles up to 1,328 ft lb.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | DMG MORI (Germany / Japan) |
| Machine Type | 5-Axis Machining Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 5-Axis Simultaneous / Positioning |
| Spindle Motor Rating | 103.3 kW |
| Spindle Taper Interface | Standard |
| Automatic Tool Changer (ATC) | 453 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Max Workpiece Diameter | 1,100 mm (43.3 in) |
| Max Workpiece Height | 1,600 mm (63 in) |
| Max Workpiece Weight | 2,200 kg (4,850.2 lb) |
| X-Axis Travel | 1,000 mm (39.4 in) |
| Y-Axis Travel | 1,250 mm (49.2 in) |
| Z-Axis Travel | 1,000 mm (39.4 in) |
| Spindle Motor Power | 103.3 hp (powerMASTER motorspindle); 69.7 hp (5X torqueMASTER) |
| Spindle Torque | 737.6 ft lb (powerMASTER motorspindle); 1,328 ft lb (5X torqueMASTER) |
| Tool Capacity | 453 tool pockets (wheel magazine) |
| Tool Replenishment Time | max. 5.6 sec (wheel magazine) |
According to secondary market equipment benchmarks for November 2026, the DMG MORI DMU 100 P duoBLOCK is estimated between $126,000 and $260,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $1,953 / month.
It depends on where the cut needs its strength. The powerMASTER motorspindle is listed with 737.6 ft lb and 103.3 hp, the 5X torqueMASTER with 1,328 ft lb and 69.7 hp. The torqueMASTER has 80% more torque, the powerMASTER about 48% more power. Neither has a published speed in the listed data, so get the speed range of both before deciding.
Up to 1,100 mm (43.3 in) in diameter, 1,600 mm (63 in) in height and 2,200 kg (4,850.2 lb). The axes travel 1,000 mm (39.4 in) in X, 1,250 mm (49.2 in) in Y and 1,000 mm (39.4 in) in Z. Height exceeds Z travel by a wide margin, so check tool reach on tall parts.
DMG MORI lists the wheel magazine with 453 tool pockets and a tool replenishment time of max. 5.6 sec. The listed data does not say whether 453 is the base size or the largest size, and gives no maximum tool length, diameter or weight, so confirm these against your longest and heaviest tools.
DMG MORI lists it with up to 50 % higher cutting power. The listed data does not describe its contents or the spindle it applies to. Since it is a package, it should appear as its own line on the quotation if heavy roughing is the purpose of the machine.
The DMU 90 p duoBLOCK travels 900 mm (35.4 in) in X, 1,050 mm (41.3 in) in Y and 850 mm (33.5 in) in Z. The DMU 100 P duoBLOCK is larger in each axis at 1,000 mm (39.4 in), 1,250 mm (49.2 in) and 1,000 mm (39.4 in).
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.