The DMG MORI DMU 105 FD monoBLOCK is an industrial-grade 5-Axis Machining Centers powered by the Standard CNC. a top spindle speed of 30,000 RPM, and a 5-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
DMG MORI DMU 105 FD monoBLOCK: 5-axis mill-turn, 1,135 x 1,050 x 750 mm travels, parts to 1,240 mm and 2,000 kg, turning table up to 2,950 ft lb.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | DMG MORI (Germany / Japan) |
| Machine Type | 5-Axis Machining Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 5-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 30,000 RPM |
| Spindle Taper Interface | Standard |
| Automatic Tool Changer (ATC) | 180 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Max Workpiece Diameter | 1,240 mm (48.8 in) |
| Max Workpiece Height | 690 mm (27.2 in) |
| Max Workpiece Weight | 2,000 kg (4,409.2 lb) |
| X-Axis Travel | 1,135 mm (44.7 in) |
| Y-Axis Travel | 1,050 mm (41.3 in) |
| Z-Axis Travel | 750 mm (29.5 in) |
| Max Spindle Speed | Up to 30,000 rpm (spindle range) |
| Spindle Torque | Up to 317 ft lb (spindle range) |
| Tool Capacity | Up to 180 pockets |
| Mill Turn Table Torque | Up to 2,950 ft lb (milling and turning) |
| Roller Guideways | 2.2 in. in all axes |
| Footprint | 193.8 ft² |
According to secondary market equipment benchmarks for November 2026, the DMG MORI DMU 105 FD monoBLOCK is estimated between $130,500 and $268,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $2,023 / month.
DMG MORI lists a table solution for complete machining with milling and turning with up to 2,950 ft lb. The listed data stops there: it gives no turning speed and no workpiece limit specific to turning. The general workpiece limits are 1,240 mm (48.8 in) in diameter, 690 mm (27.2 in) in height and 2,000 kg (4,409.2 lb).
Both have the same travels: 1,135 mm (44.7 in) in X, 1,050 mm (41.3 in) in Y and 750 mm (29.5 in) in Z. DMG MORI lists several table solutions for the 105 size, from 5-axis machining with up to 4,409 lb to milling and turning with up to 2,950 ft lb. The FD is the one for milling and turning.
Machine-integrated tool magazines are listed with up to 180 pockets. The standard size is not stated in the listed data. Since turning tools and milling tools share the magazine on a mill-turn machine, work out the pockets needed for both before settling on a size.
No. DMG MORI lists the precision package as optional, with 25 % higher precision. Standard equipment under the same heading is comprehensive cooling, a high-performance coolant unit and multi-sensor compensation. The listed data gives no positioning accuracy figure for either configuration.
The DMU 125 p FD duoBLOCK travels 1,250 mm (49.2 in) in X, 1,250 mm (49.2 in) in Y and 1,000 mm (39.4 in) in Z. The DMU 105 FD monoBLOCK has 1,135 mm (44.7 in), 1,050 mm (41.3 in) and 750 mm (29.5 in) on the same axes.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.