The DMG MORI DMU 160 P duoBLOCK is an industrial-grade 5-Axis Machining Centers powered by the Standard CNC. and a 5-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
DMG MORI DMU 160 P duoBLOCK: 5-axis, 1,600 x 1,600 x 1,100 mm travels, parts to 1,675 mm tall and 4,500 kg, spindles up to 1,327.6 ft lb.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | DMG MORI (Germany / Japan) |
| Machine Type | 5-Axis Machining Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 5-Axis Simultaneous / Positioning |
| Spindle Motor Rating | 103.3 kW |
| Spindle Taper Interface | Standard |
| Automatic Tool Changer (ATC) | 453 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Max Workpiece Diameter | 1,600 mm (63 in) |
| Max Workpiece Height | 1,675 mm (65.9 in) |
| Max Workpiece Weight | 4,500 kg (9,920.8 lb) |
| X-Axis Travel | 1,600 mm (63 in) |
| Y-Axis Travel | 1,600 mm (63 in) |
| Z-Axis Travel | 1,100 mm (43.3 in) |
| Spindle Torque | 737.6 ft lb (powerMASTER 1000 motorspindle); 1,327.6 ft lb (5X torqueMASTER) |
| Tool Capacity | 453 tool pockets (wheel magazine) |
| Spindle Motor Power | 103.3 hp (powerMASTER 1000 motorspindle); 69.7 hp (5X torqueMASTER) |
| Tool Replenishment Time | max. 5.6 sec (wheel magazine) |
According to secondary market equipment benchmarks for November 2026, the DMG MORI DMU 160 P duoBLOCK is estimated between $126,500 and $261,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $1,961 / month.
Up to 1,600 mm (63 in) in diameter, 1,675 mm (65.9 in) in height and 4,500 kg (9,920.8 lb). Travels are 1,600 mm (63 in) in X, 1,600 mm (63 in) in Y and 1,100 mm (43.3 in) in Z. The diameter matches the X and Y travel; the height exceeds the Z travel, so plan tool lengths for tall parts.
DMG MORI lists the powerMASTER 1000 motorspindle with 737.6 ft lb and 103.3 hp. The alternative is the 5X torqueMASTER with 1,327.6 ft lb and 69.7 hp, which is 80% more torque with less power. Maximum speeds for the two spindles are not in the listed data.
The DMU 125 P duoBLOCK travels 1,250 mm (49.2 in) in X, 1,250 mm (49.2 in) in Y and 1,000 mm (39.4 in) in Z. The DMU 160 P duoBLOCK travels 1,600 mm (63 in), 1,600 mm (63 in) and 1,100 mm (43.3 in). Most of the gain is in the X and Y plane; Z grows only slightly.
Yes. DMG MORI states the machine is also available in a mill-turn version, where milling and turning are done in one setup with a DirectDrive table at rotational speeds up to 400 rpm. That version is the DMU 160 p FD duoBLOCK, which has the same travels as the DMU 160 P duoBLOCK.
A wheel magazine, listed with 453 tool pockets and a tool replenishment time of max. 5.6 sec. DMG MORI describes it as compact with low space requirements. Limits for tool length, diameter and weight are not given in the listed data and matter for the large cutters a machine of this size runs.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.