The DMG MORI DMU 210 P FD is an industrial-grade 5-Axis Machining Centers powered by the Standard CNC. and a 5-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
DMG MORI DMU 210 P FD: 5-axis mill-turn, 2,100 x 2,100 x 1,250 mm travels, parts to 2,500 mm diameter and 8,000 kg, up to 303 tools.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | DMG MORI (Germany / Japan) |
| Machine Type | 5-Axis Machining Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 5-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Automatic Tool Changer (ATC) | 303 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Max Workpiece Diameter | 2,500 mm (98.4 in) |
| Max Workpiece Height | 1,460 mm (57.5 in) |
| Max Workpiece Weight | 8,000 kg (17,637 lb) |
| X-Axis Travel | 2,100 mm (82.7 in) |
| Y-Axis Travel | 2,100 mm (82.7 in) |
| Z-Axis Travel | 1,250 mm (49.2 in) |
| Positioning Accuracy | down to 10 µm standard; down to 8 µm with accuracy pack option; down to 4 µm (µPrecision variant) |
| Feed Force | up to 8,992.4 lbf |
| Tool Capacity | up to 303 tools (wheel type magazine) |
| Table Torque | up to 5,015.4 ft lb (DirectDrive table) |
| Spindle Torque | powerMASTER motor spindle up to 737.6 ft lb; torqueMASTER gear spindle 1,327.6 ft lb |
| Feed Rate Max | up to 2,362.2 ipm |
| Band Filter Unit | 980 l as standard |
According to secondary market equipment benchmarks for November 2026, the DMG MORI DMU 210 P FD is estimated between $122,500 and $252,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $1,899 / month.
Up to 2,500 mm (98.4 in) in diameter, 1,460 mm (57.5 in) in height and 8,000 kg (17,637 lb). The linear travels are 2,100 mm (82.7 in) in X and Y and 1,250 mm (49.2 in) in Z. The diameter limit is larger than the X and Y travel and the height limit is larger than Z, so check that every feature of a part near the limits can be reached in your setup.
Two are named: a powerMASTER motor spindle with up to 737.6 ft lb and a torqueMASTER gear spindle with 1,327.6 ft lb. The gear spindle has 80% more torque and suits large cutters at low speed. DMG MORI's Highlights state neither the speed nor the power of these spindles, so request both before choosing.
DMG MORI lists positioning accuracy down to 10 µm as standard. An accuracy pack option brings that down to 8 µm, and the µPrecision variant is listed at down to 4 µm. The machine supports those figures with a water-cooled feed drive, cooled linear guideways, active spindle growth control and a thermosymmetrical construction.
DMG MORI states that it does not: the machine has a 3-point support with an inherently stiff machine bed, and no foundation is required. The floor still has to carry the machine and workpieces of up to 8,000 kg (17,637 lb). The machine weight is not in the listed data, so get the floor-load figures from DMG MORI before planning the site.
Both are listed with the same travels of 2,100 × 2,100 × 1,250 mm (82.7 × 82.7 × 49.2 in). The FD is the version that turns as well as mills: its DirectDrive table has a torque of up to 5,015.4 ft lb, so a rotational part can be turned and then milled without being moved to a lathe. For purely prismatic work the turning table is capability you would not use.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.