The DMG MORI DMU 340 P FD is an industrial-grade 5-Axis Machining Centers powered by the Standard CNC. and a 5-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
DMG MORI DMU 340 P FD: mill-turn gantry machine, 3,400 x 3,400 x 2,000 mm travels, parts to 3,900 mm diameter and 20,000 kg, no-ram head.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | DMG MORI (Germany / Japan) |
| Machine Type | 5-Axis Machining Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 5-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Automatic Tool Changer (ATC) | 243 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Max Workpiece Diameter | 3,900 mm (153.5 in) |
| Max Workpiece Height | 1,960 mm (77.2 in) |
| Max Workpiece Weight | 20,000 kg (44,092.5 lb) |
| X-Axis Travel | 3,400 mm (133.9 in) |
| Y-Axis Travel | 3,400 mm (133.9 in) |
| Z-Axis Travel | 2,000 mm (78.7 in) |
| Tool Capacity | up to 243 tools (wheel type magazine) |
| Feed Force | up to 11,240 lbf |
| Table Torque | up to 7,523 ft lb (DirectDrive table) |
| Spindle Torque | powerMASTER motor spindle up to 737.6 ft lb; torqueMASTER gear spindle 1,327.6 ft lb |
| Feed Rate Max | up to 1,575 ipm |
| Band Filter Unit | 2,500 l as standard |
According to secondary market equipment benchmarks for November 2026, the DMG MORI DMU 340 P FD is estimated between $125,500 and $256,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $1,945 / month.
Travels are 3,400 mm (133.9 in) in X, 3,400 mm (133.9 in) in Y and 2,000 mm (78.7 in) in Z. The maximum workpiece is 3,900 mm (153.5 in) in diameter, 1,960 mm (77.2 in) high and 20,000 kg (44,092.5 lb). The diameter limit is larger than the X and Y travel, so features near the rim are machined by rotating the table.
DMG MORI describes a short and continuous throat depth of the milling head with no ram design. Vertical movement comes from the cross beam, which travels up and down with hydraulic weight compensation. The head therefore keeps the same overhang over the whole 2,000 mm (78.7 in) of Z, where a ram would extend further from its support the deeper it reaches.
DMG MORI lists feed speed up to 1,575 ipm, feed power up to 11,240 lbf and dynamics up to 16.4 ft/s². The feed drive is water-cooled and the linear guideways are cooled, which DMG MORI ties to long-term accuracy together with active spindle growth control.
The Highlights name a powerMASTER motor spindle with up to 737.6 ft lb and a torqueMASTER gear spindle with 1,327.6 ft lb. Tools are held in a wheel type magazine with up to 243 places. Spindle speed, spindle power and the standard magazine size are not stated, so confirm them in the quotation.
The layout is different. The DMU 340 Gantry has a long rectangular envelope of 6,000 × 2,800 × 1,500 mm (236.2 × 110.2 × 59.1 in). The DMU 340 P FD is square in plan at 3,400 × 3,400 mm with 2,000 mm of Z, and it adds a DirectDrive turning table with up to 7,523 ft lb for round parts.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.