The DMG MORI DMU 80P duoBLOCK is an industrial-grade 5-Axis Machining Centers powered by the Standard CNC. and a 5-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
DMG MORI DMU 80P duoBLOCK: 5-axis, 800 x 1,050 x 850 mm travels, workpieces to 950 mm diameter and 1,800 kg, spindles up to 958.8 ft lb.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | DMG MORI (Germany / Japan) |
| Machine Type | 5-Axis Machining Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 5-Axis Simultaneous / Positioning |
| Spindle Motor Rating | 103.3 kW |
| Spindle Taper Interface | Standard |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Max Workpiece Diameter | 950 mm (37.4 in) |
| Max Workpiece Height | 1,450 mm (57.1 in) |
| Max Workpiece Weight | 1,800 kg (3,968.3 lb) |
| X-Axis Travel | 800 mm (31.5 in) |
| Y-Axis Travel | 1,050 mm (41.3 in) |
| Z-Axis Travel | 850 mm (33.5 in) |
| Spindle Motor Power | 103.3 hp (powerMASTER motorspindle); 49.6 hp (5X torqueMASTER) |
| Spindle Torque | 737.6 ft lb (powerMASTER motorspindle); 958.8 ft lb (5X torqueMASTER) |
| Linear Guide Width | 2.2 in |
| Ball Screws | ø 2.0 / 2.0 / 2.0 in, internally cooled as standard |
| Machine Availability | 96 % |
According to secondary market equipment benchmarks for November 2026, the DMG MORI DMU 80P duoBLOCK is estimated between $130,500 and $267,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $2,023 / month.
According to secondary market equipment benchmarks for November 2026, the DMG MORI DMU 80P duoBLOCK is estimated between $130,500 and $267,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $2,023 / month.
800 mm (31.5 in) in X, 1,050 mm (41.3 in) in Y and 850 mm (33.5 in) in Z. Y is the longest axis and X the shortest, which suits tall parts more than long ones. The maximum workpiece height of 1,450 mm (57.1 in) is greater than the Z travel, so tool reach on tall parts should be checked.
The powerMASTER motorspindle is listed with 737.6 ft lb and 103.3 hp. The 5X torqueMASTER is listed with 958.8 ft lb and 49.6 hp. The first has roughly twice the power, the second 30% more torque. Speeds are not listed, so ask for the speed range of each before deciding.
DMG MORI notes that the machine is also available in a mill-turn version, with milling and turning in one setup on a DirectDrive table at rotational speeds up to 800 rpm. That version is the DMU 80 p FD duoBLOCK, which has the same travels of 800 × 1,050 × 850 mm (31.5 × 41.3 × 33.5 in).
The listed measures are a completely water-cooled feed drive, ball screws of ø 2.0 in that are internally cooled as standard, and a spindle growth sensor (SGS) that compensates for the spindle lengthening as it heats. DMG MORI describes the temperature response as significantly improved but gives no figure for it.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.