The DMG MORI DMV 200 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. a top spindle speed of 20,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
DMG MORI DMV 200: fixed-table VMC with 2,000 x 700 x 550 mm travels, 3,000 kg (6,613.9 lb) workpieces, 430 Nm powerMASTER or spindles to 20,000 rpm.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | DMG MORI (Germany / Japan) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 20,000 RPM |
| Spindle Taper Interface | Standard |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Max Workpiece Length | 2,160 mm (85 in) |
| Max Workpiece Width | 700 mm (27.6 in) |
| Max Workpiece Height | 550 mm (21.7 in) |
| Max Workpiece Weight | 3,000 kg (6,613.9 lb) |
| X-Axis Travel | 2,000 mm (78.7 in) |
| Y-Axis Travel | 700 mm (27.6 in) |
| Z-Axis Travel | 550 mm (21.7 in) |
| Max Spindle Speed | Up to 20,000 rpm; powerMASTER 12,000 rpm |
| Rapid Traverse | 42 m/min in all linear axes |
| Spindle Torque | 430 Nm (powerMASTER) |
| Circular Interpolation Accuracy | Double Ballbar in all planes < 6 µm |
| Linear Scales | Linear scales in all linear axes |
According to secondary market equipment benchmarks for November 2026, the DMG MORI DMV 200 is estimated between $60,500 and $108,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $938 / month.
It is the high-torque choice in the spindle range. DMG MORI gives it as powerMASTER with torque of 430 Nm and 12,000 rpm, and refers to stability during rough cutting with it. Other spindles in the range go up to 20,000 rpm. Spindle power is not stated in the Highlights.
Up to 3,000 kg (6,613.9 lb) on the fixed table. The maximum workpiece is 2,160 mm (85 in) long, 700 mm (27.6 in) wide and 550 mm (21.7 in) high. X travel is 2,000 mm (78.7 in), so a part of maximum length runs slightly past the cutting range.
Yes. DMG MORI states linear scales in all linear axes, direct drive transmission in all axes and an active cooling system for selected components. Circular interpolation accuracy by Double Ballbar in all planes is given as under 6 µm.
In X travel. The DMV 200 has 2,000 mm (78.7 in) and the DMV 145 has 1,450 mm (57.1 in). Both have 700 mm (27.6 in) of Y and 550 mm (21.7 in) of Z. The DMV 200 handles workpieces up to 3,000 kg (6,613.9 lb).
Rapid traverse is 42 m/min in all linear axes. Because the table is fixed, DMG MORI states a constant dynamic characteristic regardless of the workpiece weight, so the rate applies whether the table carries a light part or the full 3,000 kg.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.