The DMG MORI DMX 60 U is an industrial-grade 5-Axis Machining Centers powered by the Standard CNC. a top spindle speed of 20,000 RPM, and a 5-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
DMG MORI DMX 60 U: 5-axis machining center with swivel-rotary table, 600 x 600 x 510 mm travels, parts to 630 mm diameter and 300 kg.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | DMG MORI (Germany / Japan) |
| Machine Type | 5-Axis Machining Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 5-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 20,000 RPM |
| Spindle Taper Interface | Standard |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Max Workpiece Diameter | 630 mm (24.8 in) |
| Max Workpiece Height | 450 mm (17.7 in) |
| Max Workpiece Weight | 300 kg (661.4 lb) |
| X-Axis Travel | 600 mm (23.6 in) |
| Y-Axis Travel | 600 mm (23.6 in) |
| Z-Axis Travel | 510 mm (20.1 in) |
| Max Spindle Speed | up to 20,000 rpm (full range of available spindles) |
| Spindle Torque | 200 Nm (High Torque version) |
| Rapid Traverse | 42 m/min in all linear axes |
| Table T Slots | 7 T-slots |
| Circular Interpolation Accuracy | < 6 µm (Double Ballbar in all planes) |
According to secondary market equipment benchmarks for November 2026, the DMG MORI DMX 60 U is estimated between $129,500 and $267,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $2,007 / month.
Workpieces up to 630 mm (24.8 in) in diameter, 450 mm (17.7 in) in height and 300 kg (661.4 lb). Travels are 600 mm (23.6 in) in X, 600 mm (23.6 in) in Y and 510 mm (20.1 in) in Z. The diameter limit is a little more than the X and Y travel, so the full diameter is covered with the help of the rotary table.
DMG MORI describes a full range of spindles, up to 20,000 rpm, or a High Torque version with 200 Nm. Power ratings, tool interface and the speed of the High Torque spindle are not in the listed data, so request the spindle data sheet with the quotation.
Rapid traverse is 42 m per minute in all linear axes, which DMG MORI states is 40% faster than the predecessor. The B and C axes of the table are said to be over 60% faster than before, but no absolute table speed is listed.
The machine has a direct measuring system with linear scales in all linear axes, direct drive transmission in the X and Y axes and multisensor thermal compensation. For circular interpolation DMG MORI quotes a Double Ballbar result below 6 µm in all planes. A positioning accuracy figure is not listed.
X travel. The DMX 80 u has 800 mm (31.5 in) of X, against 600 mm (23.6 in) on the DMX 60 U. Y and Z are the same on both at 600 mm (23.6 in) and 510 mm (20.1 in). Choose by the longest part or the widest fixture you expect to put on the table.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.