The DMG MORI GM 16|6 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. a top spindle speed of 9,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
DMG MORI GM 16|6 multi-spindle automatic: 16 mm bar, 80 mm (3.1 in) part length, 9,000 rpm main spindles, cycle times under 0.9 second.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | DMG MORI (Germany / Japan) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 9,000 RPM |
| Spindle Taper Interface | Standard |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X-Axis Travel | 28 mm (1.1 in) |
| Z-Axis Travel | 45 mm (1.8 in) |
| Max Workpiece Diameter | 16 mm |
| Max Workpiece Length | 80 mm (3.1 in) |
| Max Bar Capacity | 16 mm |
| Spindle Bearing Cooling | Oil cooling of all spindle bearings |
| Max Spindle Speed | 9,000 rpm (main spindles) |
| Cycle Time Min | Under 0.9 second (adjustable minimum), also for double drop production |
| Compound Slides | Four compound-rest slides for radial or straight turning |
| Spindle Drum Locking | Hirth coupling |
According to secondary market equipment benchmarks for November 2026, the DMG MORI GM 16|6 is estimated between $49,500 and $87,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $767 / month.
Bar up to 16 mm and workpieces up to 80 mm (3.1 in) long. The slides travel 28 mm (1.1 in) in X and 45 mm (1.8 in) in Z. Since the Z travel is shorter than the maximum workpiece length, ask DMG MORI how the longest parts are produced.
The main spindles run at 9,000 rpm, and the minimum cycle time can be adjusted to under 0.9 second. DMG MORI states the same minimum for double drop production. Whether a given part reaches that depends on its longest single operation.
It has a Monoblock structure in a frame or portal design with overhead bracing. The spindle drum is locked by a Hirth coupling. Workpieces are machined from the front without angle tools, the front-working tools are guided on the central block, and all spindle bearings are oil-cooled.
Size. The GM 16|6 takes 16 mm bar and 80 mm (3.1 in) workpieces with 28 mm (1.1 in) of X and 45 mm (1.8 in) of Z. The GM 20|6 takes 25 mm (1 in) bar and 100 mm (3.9 in) workpieces with 42 mm (1.7 in) of X and 50 mm (2 in) of Z.
Three things the manufacturer's page leaves open: the spindle power, the type of control, and how working strokes and cycle time are adjusted in practice. The page does state that the stroke of every station is adjusted independently and steplessly, and that four compound-rest slides do the radial or straight turning.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.