The DMG MORI i 30 V is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
DMG MORI i 30 V: vertical machining center with 400 × 270 × 280 mm travels, 2,440.9 ipm rapids, 61.3 in. width and a 150 kg workpiece limit.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | DMG MORI (Germany / Japan) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 10,846 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Max Workpiece Length | 600 mm (23.6 in) |
| Max Workpiece Width | 300 mm (11.8 in) |
| Max Workpiece Height | 520 mm (20.5 in) |
| Max Workpiece Weight | 150 kg (330.7 lb) |
| X-Axis Travel | 400 mm (15.7 in) |
| Y-Axis Travel | 270 mm (10.6 in) |
| Z-Axis Travel | 280 mm (11 in) |
| Rapid Traverse | 2,440.9 ipm |
| Machine Weight | 10,846 lb. |
| Machine Dimensions | 61.3 × 128.9 × 104.3 in. (width × depth × height) |
| Tool Changer | Armless-type ATC |
| Guideways | Roller guides with no overhang |
According to secondary market equipment benchmarks for November 2026, the DMG MORI i 30 V is estimated between $50,000 and $88,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $775 / month.
According to secondary market equipment benchmarks for November 2026, the DMG MORI i 30 V is estimated between $50,000 and $88,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $775 / month.
Up to 600 mm (23.6 in) long, 300 mm (11.8 in) wide and 520 mm (20.5 in) high, with a weight of up to 150 kg (330.7 lb). Travels are 400 mm (15.7 in) in X, 270 mm (10.6 in) in Y and 280 mm (11 in) in Z, so a part at the maximum dimensions is larger than the volume the spindle can reach in one setup.
The rapid traverse rate is 2,440.9 ipm, which DMG MORI describes as approx. 30% up compared with the conventional machine. DMG MORI does not name that machine or state acceleration or cutting feed, so the percentage cannot be turned into a cycle-time figure without a time study on your own part.
An armless-type ATC. DMG MORI's reasoning is that it is simple and has fewer components, which it lists under reliability. The number of tools, the tool size limits and the tool-change time are not stated for this model, so ask for all three before comparing it with another machine.
The DMP 35 has 350 mm (13.8 in) of X, 420 mm (16.5 in) of Y and 380 mm (15 in) of Z travel. The i 30 V has 400 mm (15.7 in) of X, 270 mm (10.6 in) of Y and 280 mm (11 in) of Z, so it is longer in X and shorter in the other two axes.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.