The DMG MORI LASERTEC 20 PrecisionTool is an industrial-grade Fiber Laser Cutting Machines powered by the Siemens 840D solutionline with Operate 4.7 on CELOS. and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
DMG MORI LASERTEC 20 PrecisionTool: 5-axis laser machine for PCD, CVD-D and CBN tools. 200 x 400 x 280 mm travels, linear drives, 37.7 ft² footprint.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | DMG MORI (Germany / Japan) |
| Machine Type | Fiber Laser Cutting Machines |
| CNC Controller System | Siemens 840D solutionline with Operate 4.7 on CELOS |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X-Axis Travel | 200 mm (7.9 in) |
| Y-Axis Travel | 400 mm (15.7 in) |
| Z-Axis Travel | 280 mm (11 in) |
| CNC Control | Siemens 840D solutionline with Operate 4.7 on CELOS |
| Axis Acceleration | > 2 g (linear drives in the X-, Y-, Z-axis) |
| Swivel Range | –10° / +130° (integrated swivel rotary table, 4th / 5th axis as standard) |
| Footprint | 37.7 ft² |
| Automation | Integrated linear magazine PH 10 | 100 |
According to secondary market equipment benchmarks for November 2026, the DMG MORI LASERTEC 20 PrecisionTool is estimated between $45,500 and $81,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $705 / month.
PCD, CVD-D and CBN. DMG MORI lists chip-free cutting edges, relief angles and chip breakers in those three materials. The process is contact-free, so it needs no electrodes and there is no tool wear on the machine side.
200 mm (7.9 in) in X, 400 mm (15.7 in) in Y and 280 mm (11 in) in Z. The three linear axes have linear drives rated at more than 2 g. The 4th and 5th axes are an integrated swivel rotary table, standard on the machine, with a swivel range of –10° / +130°.
PreCut is the version that separates cutting inserts out of blanks in 5 axes. DMG MORI states the separation is up to ten times faster than conventional wire EDM. That is a maximum figure, so the gain on a particular insert shape and blank thickness should be confirmed with a test cut.
An integrated linear magazine, the PH 10 | 100. It handles cutting discs, shaft tools and tools with HSK holders, and different tool types can be combined in one load. DMG MORI lists a 64.6 ft² footprint for the automation solution and offers customized expansion or a combination with additional LASERTEC 20 machines on request.
A Siemens 840D solutionline with Operate 4.7 on CELOS. The tool-specific programming is done in LASERSOFT software packages, which DMG MORI lists for shank and HSK tools, ISO and special cutting inserts and chip breakers.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.