The DMG MORI NLX 2000 is an industrial-grade CNC Lathes & Turning Centers powered by the Standard CNC. and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
DMG MORI NLX 2000 lathe: 65 mm (2.6 in) bar, 366 mm (14.4 in) max diameter, 510 mm length, Z 590 mm, 10,000 rpm rotary tools, 100 mm Y.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | DMG MORI (Germany / Japan) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X-Axis Travel | 260 mm (10.2 in) |
| Y-Axis Travel | 100 mm (3.9 in) |
| Z-Axis Travel | 590 mm (23.2 in) |
| Max Workpiece Diameter | 366 mm (14.4 in) |
| Max Workpiece Length | 510 mm (20.1 in) |
| Max Bar Capacity | 65 mm (2.6 in) |
| Turret Type | BMT (Built-in Motor Turret) |
| Driven Tool Speed | 10,000 rpm (rotary tool spindle) |
| Driven Tool Torque | Max. 21.4 ft lbf (3 min) |
| Guideways | Slideways on X-, Z-, and Y-axis |
According to secondary market equipment benchmarks for November 2026, the DMG MORI NLX 2000 is estimated between $40,500 and $81,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $628 / month.
Decide on bar size and part length. The NLX 2000 takes 65 mm (2.6 in) bar and parts up to 510 mm (20.1 in) long on 590 mm (23.2 in) of Z travel. The NLX 2500 takes 90 mm (3.5 in) bar and workpieces up to 460 mm (18.1 in) in diameter, with 795 mm (31.3 in) or 1,345 mm (53 in) of Z travel. X and Y travels are 260 mm (10.2 in) and 100 mm (3.9 in) on both.
Bar up to 65 mm (2.6 in) through the spindle, and chucked workpieces up to 366 mm (14.4 in) in diameter and 510 mm (20.1 in) long. The axes travel 260 mm (10.2 in) in X, 100 mm (3.9 in) in Y and 590 mm (23.2 in) in Z.
The rotary tool spindle runs at 10,000 rpm and its maximum torque is 21.4 ft lbf on a 3 min rating. That suits drilling, tapping and light milling of flats and keyways within the 100 mm (3.9 in) Y travel. For sustained heavy milling, ask DMG MORI for a continuous torque figure, because only the short-time one is published.
Coolant circulation in the machine body is standard, and DMG MORI describes the structure as heat-controlling, with thermal displacement thoroughly controlled. The Highlights give no accuracy figure for the result, so ask for one if tolerances are tight.
No. DMG MORI lists the high-precision, quick-change turret as an option. The turret described for the machine is the BMT (Built-in Motor Turret) type with a 10,000 rpm rotary tool spindle.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.