The DMG MORI NLX 2500 2nd Generation is an industrial-grade CNC Lathes & Turning Centers powered by the Standard CNC. a top spindle speed of 5,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
DMG MORI NLX 2500 2nd Generation: parts to Ø 366 x 1,258 mm, 105 mm bar, 5,000 rpm 843 Nm left spindle, BMT turret to 12,000 rpm, optional right spindle.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | DMG MORI (Germany / Japan) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 5,000 RPM |
| Spindle Taper Interface | Standard |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X-Axis Travel | 260 mm (10.2 in) |
| Y-Axis Travel | 120 mm (4.7 in) |
| Max Workpiece Diameter | 366 mm (14.4 in) |
| Max Bar Capacity | 105 mm (4.1 in) |
| Z-Axis Travel | 795 mm (31.3 in) [Type 700] / 1,345 mm (53 in) [Type 1250] |
| Max Workpiece Length | 708 mm (27.9 in) [Type 700] / 1,258 mm (49.5 in) [Type 1250] |
| Max Spindle Speed | 5,000 rpm (10" left spindle); 3,000 rpm (12" left spindle, optional) |
| Spindle Torque | 843 Nm (10" left spindle); 1,273 Nm (12" left spindle, optional) |
| Driven Tool Speed | Up to 12,000 rpm (High-Speed); up to 6,000 rpm (High-Torque) |
| Driven Tool Torque | Up to 86 Nm (High-Speed); up to 100 Nm (High-Torque) |
| Sub Spindle Speed | Right spindle (optional): from 7,000 rpm (6") to 5,000 rpm (10") |
| Sub Spindle Torque | Right spindle (optional): from 95 Nm (6") up to max. 577 Nm (10") |
| Turret Stations | Up to 20 tool stations (BMT); 12 stations (VDI) |
| Coolant Tank | 900 l |
According to secondary market equipment benchmarks for November 2026, the DMG MORI NLX 2500 2nd Generation is estimated between $40,500 and $81,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $628 / month.
The left spindle is 10 in with 5,000 rpm and 843 Nm, or optionally 12 in with 3,000 rpm and 1,273 Nm. The right spindle is itself an option, from 6 in with 7,000 rpm and 95 Nm up to 10 in with 5,000 rpm and a maximum of 577 Nm. DMG MORI gives its MASTER spindles a 36-month warranty with unlimited spindle hours.
High-Speed runs driven tools up to 12,000 rpm with 86 Nm. High-Torque runs up to 6,000 rpm with 100 Nm. Choose High-Speed for small end mills and drills that need rpm, and High-Torque for larger drills, taps and cutters. The BMT turret has up to 20 tool stations; the VDI version has 12 stations.
No. DMG MORI lists the right spindle as optional. The versions run from 6 in with 7,000 rpm and 95 Nm up to 10 in with 5,000 rpm and a maximum of 577 Nm. A machine ordered without it cannot machine the back of the part in the same cycle.
Two. The Type 700 has 795 mm (31.3 in) of Z travel and a maximum workpiece length of 708 mm (27.9 in). The Type 1250 has 1,345 mm (53 in) of Z travel and takes workpieces up to 1,258 mm (49.5 in). X travel is 260 mm (10.2 in) and Y travel 120 mm (4.7 in) on both.
Under GREENMODE, DMG MORI quotes 16% less energy, 44% less lubrication oil and 12% less compressed air consumption, and notes that the energy value is for the NLX 2500 | 700. A machine with 400 V is listed with up to 6% reduced energy consumption. The coolant tank holds 900 l and has an integrated sludge and oil collection system intended to extend coolant life.
In the travels, only Y changes: the NLX 2500 2nd Generation has 120 mm (4.7 in) against 100 mm (3.9 in) on the NLX 2500, with the same 260 mm (10.2 in) of X and the same 795 mm (31.3 in) and 1,345 mm (53 in) Z travels.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.