The DMG MORI NLX 4000 is an industrial-grade CNC Lathes & Turning Centers powered by the Standard CNC. and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
DMG MORI NLX 4000 turning center: 600 mm (23.6 in) max diameter, 365 mm X, Z 875 or 1,685 mm, 117 mm bar, BMT turret with 73.8 ft lbf tool torque.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | DMG MORI (Germany / Japan) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X-Axis Travel | 365 mm (14.4 in) |
| Y-Axis Travel | 120 mm (4.7 in) |
| Max Workpiece Diameter | 600 mm (23.6 in) |
| Max Bar Capacity | 117 mm (4.6 in) |
| Z-Axis Travel | 875 mm (34.4 in) [Type 750] / 1,685 mm (66.3 in) [Type 1500] |
| Max Workpiece Length | 746 mm (29.4 in) [Type 750] / 1,584 mm (62.4 in) [Type 1500] |
| Turret Type | BMT (Built-in Motor Turret) |
| Driven Tool Torque | 73.8 ft lbf (4 min) / 50.2 ft lbf (cont) |
| Positioning Accuracy | C-axis: 6.8 sec. |
According to secondary market equipment benchmarks for November 2026, the DMG MORI NLX 4000 is estimated between $44,000 and $86,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $682 / month.
The Type 750 has 875 mm (34.4 in) of Z travel and a maximum workpiece length of 746 mm (29.4 in). The Type 1500 has 1,685 mm (66.3 in) of Z travel and takes 1,584 mm (62.4 in). DMG MORI also lists coolant circulation inside the castings for the 750 type only. X travel, Y travel, workpiece diameter and bar capacity are the same.
The table gives a maximum bar capacity of 117 mm (4.6 in). DMG MORI's highlights give the through-spindle hole diameter as 5.7 in / 7.3 in. The two figures are not the same thing: usable bar size also depends on the chuck and draw tube, so confirm the configuration quoted.
According to secondary market equipment benchmarks for November 2026, the DMG MORI NLX 4000 is estimated between $44,000 and $86,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $682 / month.
Three things are listed. The slideway area is up 50% on the X-axis and 90% on the Z-axis compared with DMG MORI's conventional machine. Large-diameter ball screws are used. DMG MORI also lists the 5.7 in / 7.3 in through-spindle hole under the same heading.
By X travel it is the middle machine: the NLX 3000 has 280 mm (11 in), the NLX 4000 has 365 mm (14.4 in) and the NLX 6000 has 485 mm (19.1 in). The NLX 3000 and NLX 4000 share 120 mm (4.7 in) of Y travel, while the NLX 6000 has 200 mm (7.9 in).
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.