The DMG MORI NLX 6000 Y is an industrial-grade CNC Lathes & Turning Centers powered by the Standard CNC. and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
DMG MORI NLX 6000 Y: 200 mm (7.9 in) Y travel, 920 mm max diameter, 2,000 mm part length, BMT turret with 86.3 ft lbf rotary tool torque.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | DMG MORI (Germany / Japan) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X-Axis Travel | 485 mm (19.1 in) |
| Y-Axis Travel | 200 mm (7.9 in) |
| Z-Axis Travel | 2,150 mm (84.6 in) |
| Max Workpiece Diameter | 920 mm (36.2 in) |
| Max Workpiece Length | 2,000 mm (78.7 in) |
| Max Bar Capacity | 116 mm (4.6 in) |
| Turret Type | BMT (Built-in Motor Turret) |
| Driven Tool Torque | Max. 86.3 ft lbf (10%ED) |
| Guideways | Slideways on X-, Z-, and Y-axis |
| Steady Rest | Steady rest quick change system (option) |
According to secondary market equipment benchmarks for November 2026, the DMG MORI NLX 6000 Y is estimated between $45,000 and $87,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $698 / month.
According to secondary market equipment benchmarks for November 2026, the DMG MORI NLX 6000 Y is estimated between $45,000 and $87,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $698 / month.
DMG MORI states a maximum rotary tool spindle torque of 86.3 ft lbf at 10%ED, delivered by a BMT (Built-in Motor Turret). It describes the milling capacity as rivaling machining centers with a No. 40 taper spindle. The 10%ED rating is intermittent, and a continuous torque is not published.
Not in the listed figures. Both are shown with 485 mm (19.1 in) of X, 200 mm (7.9 in) of Y and 2,150 mm (84.6 in) of Z, the same travels as the NLX 6000. Workpiece limits are also the same: 920 mm (36.2 in) in diameter and 2,000 mm (78.7 in) in length.
Yes. DMG MORI states that slideways are used on the X-, Z- and Y-axis, for higher vibration damping performance and dynamic rigidity, and calls them wide. Large-diameter ball screws are also listed. Milling off the centreline loads the Y-axis guideway sideways, which is where the damping of a sliding way helps.
Only up to 116 mm (4.6 in), the listed maximum bar capacity. That is a small fraction of the 920 mm (36.2 in) maximum workpiece diameter, so most parts will be loaded into the chuck individually.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.