The DMG MORI NRX 2000 is an industrial-grade CNC Lathes & Turning Centers powered by the MAPPS - COMPACTline. and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
DMG MORI NRX 2000 two-spindle production lathe: parts to 180 mm (7.1 in) diameter and 100 mm long, 65.0 in wide without loader, 82.7 in high.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | DMG MORI (Germany / Japan) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | MAPPS - COMPACTline |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X-Axis Travel | 100 mm (3.9 in) |
| Z-Axis Travel | 220 mm (8.7 in) |
| Max Workpiece Diameter | 180 mm (7.1 in) |
| Max Workpiece Length | 100 mm (3.9 in) |
| CNC Control | MAPPS - COMPACTline |
| Machine Width | 65.0 in without loader |
| Machine Height | 82.7 in |
| Installation Volume | 501.5 ft3 including loader, workpiece stocker and rear left discharge type chip conveyor |
| Spindles | 2 (spindle 1 and spindle 2) |
| Operation Panel | 12.1-inch multi-touch operation panel |
According to secondary market equipment benchmarks for November 2026, the DMG MORI NRX 2000 is estimated between $42,000 and $83,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $651 / month.
Workpieces up to 180 mm (7.1 in) in diameter and 100 mm (3.9 in) long. The axis travels are 100 mm (3.9 in) in X and 220 mm (8.7 in) in Z. Those limits point to short chucked parts such as discs, rings and hubs.
According to secondary market equipment benchmarks for November 2026, the DMG MORI NRX 2000 is estimated between $42,000 and $83,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $651 / month.
It has two spindles, and DMG MORI describes it as running two machining processes at the same time with spindle 1 and spindle 2. The transfer equipment and loader move the part, so one machine does the work of two single-spindle lathes in unmanned operation.
DMG MORI lists its own operation system, MAPPS on COMPACTline, with a 12.1-inch multi-touch operation panel. No other control option appears in the published highlights for this model.
DMG MORI states that the low machine height, 82.7 in, allows loading into 20 ft dry containers. Confirm how the loader and workpiece stocker ship, because the 65.0 in machine width is given without the loader.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.