The DMG MORI NT 5400 DCG is an industrial-grade Multi-Tasking & Mill-Turn Machines powered by the Standard CNC. and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
DMG MORI NT 5400 DCG: turn-mill for parts up to 920 mm (36.2 in) x 1,921 mm (75.6 in), 1,040 x 510 x 2,140 mm travels, ±120° B-axis.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | DMG MORI (Germany / Japan) |
| Machine Type | Multi-Tasking & Mill-Turn Machines |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X-Axis Travel | 1,040 mm (40.9 in) |
| Y-Axis Travel | 510 mm (20.1 in) |
| Z-Axis Travel | 2,140 mm (84.3 in) |
| Max Workpiece Diameter | 920 mm (36.2 in) |
| Max Workpiece Length | 1,921 mm (75.6 in) |
| Max Bar Capacity | 103 mm (4.1 in) |
| B Axis Swivel | ±120° |
| B Axis Drive | Direct drive motor (DDM) |
| Tool Spindle Interface | Capto, 2-face contact |
| Tailstock | Digital tailstock as standard |
According to secondary market equipment benchmarks for November 2026, the DMG MORI NT 5400 DCG is estimated between $48,500 and $86,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $752 / month.
Up to 920 mm (36.2 in) in diameter and 1,921 mm (75.6 in) in length. Travels are 1,040 mm (40.9 in) in X, 510 mm (20.1 in) in Y and 2,140 mm (84.3 in) in Z, and bar capacity is 103 mm (4.1 in).
The NT 4250 DCG travels 750 mm (29.5 in) in X, 420 mm (16.5 in) in Y and 1,650 mm (65 in) in Z. The NT 5400 DCG is larger in every axis, at 1,040 mm (40.9 in), 510 mm (20.1 in) and 2,140 mm (84.3 in). Both have the B-axis with ±120° rotation, the Capto tool spindle and the standard digital tailstock.
When the part is longer than 1,921 mm (75.6 in) or needs more Y travel. The NT 6600 DCG has the same 1,040 mm (40.9 in) X travel as the NT 5400 DCG, with 660 mm (26 in) of Y and 6,150 mm (242.1 in) of Z.
The B-axis carries a direct drive motor (DDM) and rotates ±120°, which DMG MORI lists for simultaneous 5-axis machining of complex parts. The tool spindle follows the 2-face contact Capto specification.
Only for bar up to 103 mm (4.1 in). The machine is sized for workpieces up to 920 mm (36.2 in) in diameter, so its strengths are in chucked parts and in shafts held against the digital tailstock, which is standard.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.