The DMG MORI NZ DUE is an industrial-grade CNC Lathes & Turning Centers powered by the Standard CNC. a top spindle speed of 7,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
DMG MORI NZ DUE production lathe: 72 mm (2.8 in) bar, 1,290 mm Z travel, main and counter spindle with 174 Nm and up to 7,000 rpm, 12,000 rpm driven tools.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | DMG MORI (Germany / Japan) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 7,000 RPM |
| Spindle Taper Interface | Standard |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X-Axis Travel | 210 mm (8.3 in) |
| Y-Axis Travel | 80 mm (3.1 in) |
| Z-Axis Travel | 1,290 mm (50.8 in) |
| Max Workpiece Length | 1,290 mm (50.8 in) |
| Max Bar Capacity | 72 mm (2.8 in) |
| B Axis Swivel | -10° to +100° (B-axis possible) |
| Max Spindle Speed | Up to 7,000 rpm (5,000 rpm as standard), main and counter spindle |
| Spindle Torque | 174 Nm (100 % DC), main and counter spindle |
| Driven Tool Speed | 12,000 rpm (built-in motor turret) |
| Driven Tool Torque | Up to 24 Nm |
| Driven Tool Power | Up to 16 kW |
| Turret Stations | 12 stations for VDI 30 and BMT 40 or 16 stations for VDI 25 and BMT 45 |
| Twin Spindle | Turning function up to 4,000 rpm and 60 Nm (100 % DC); rotating guide bush up to 5,000 rpm |
According to secondary market equipment benchmarks for November 2026, the DMG MORI NZ DUE is estimated between $41,500 and $82,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $643 / month.
In the published travels, Z. The NZ DUE has 1,290 mm (50.8 in) of Z travel and the NZ DUE Formula has 740 mm (29.1 in). X travel of 210 mm (8.3 in) and Y travel of 80 mm (3.1 in) are the same on both.
DMG MORI gives the main and counter spindle as up to 7,000 rpm, with 5,000 rpm as standard, and 174 Nm at 100% DC. Check which speed version is quoted, because the 7,000 rpm figure is not the standard one.
It gives two independent work areas for 6-sided complete machining. It has a turning function with up to 4,000 rpm and 60 Nm at 100% DC, a SWISSTYPE function as a rotating guide bush at up to 5,000 rpm, and a steady rest function. DMG MORI calls it ideal on the long bed but also possible on the short bed version.
Either 12 stations for VDI 30 and BMT 40, or 16 stations for VDI 25 and BMT 45. The driven tools run from a 12,000 rpm built-in motor turret with up to 24 Nm / 16 kW.
DMG MORI lists a B-axis as possible, with a swivel range of -10° to +100°. Its stated purpose is to let standard tools replace special angle tools and to make 5-axis simultaneous operation possible. Confirm which turret carries it on the machine quoted.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.