The DMG MORI NZX 2500 is an industrial-grade CNC Lathes & Turning Centers powered by the Standard CNC. and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
DMG MORI NZX 2500 lathe: parts to 370 mm (14.6 in) diameter and 1,000 mm long, 1,050 mm Z, slideways on all axes, 10,000 rpm BMT rotary tools.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | DMG MORI (Germany / Japan) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X-Axis Travel | 225 mm (8.9 in) |
| Y-Axis Travel | 120 mm (4.7 in) |
| Z-Axis Travel | 1,050 mm (41.3 in) |
| Max Workpiece Diameter | 370 mm (14.6 in) |
| Max Workpiece Length | 1,000 mm (39.4 in) |
| Driven Tool Speed | 10,000 rpm |
| Driven Tool Torque | Max. 29.5 ft lbf (3 min, option) |
| Turret Type | BMT (Built-in Motor Turret) |
| Guideways | Slideways for all axes |
| Scale Feedback | High-resolution direct scale feedback (option) |
According to secondary market equipment benchmarks for November 2026, the DMG MORI NZX 2500 is estimated between $38,500 and $78,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $597 / month.
X travel is 225 mm (8.9 in), Y travel 120 mm (4.7 in) and Z travel 1,050 mm (41.3 in). The maximum workpiece is 370 mm (14.6 in) in diameter and 1,000 mm (39.4 in) long. DMG MORI's table gives no bar capacity for this model.
According to secondary market equipment benchmarks for November 2026, the DMG MORI NZX 2500 is estimated between $38,500 and $78,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $597 / month.
Slideways. DMG MORI states that slideways are used for all axes of the NZX 2500. Sliding ways give more damping in heavy and interrupted cuts, which matches a machine sized for parts up to 370 mm (14.6 in) in diameter.
The NZX 2500 has more travel on all three axes: 225 mm (8.9 in) of X, 120 mm (4.7 in) of Y and 1,050 mm (41.3 in) of Z. The NZX 2000 has 210 mm (8.3 in), 110 mm (4.3 in) and 810 mm (31.9 in). The largest difference is in Z.
No. High-resolution direct scale feedback is listed as an option. The base machine relies on what DMG MORI describes as a thermally stable structure, so scales should be added to the quotation when tolerances have to hold over long cycles.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.