The DMG MORI NZX-S 1500 is an industrial-grade CNC Lathes & Turning Centers powered by the Standard CNC. and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
DMG MORI NZX-S 1500 two-turret shaft lathe: 60 mm (2.4 in) X, 1,100 mm Z, parts to 120 mm diameter and 1,055 mm long, from approx. 30.1 sq ft.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | DMG MORI (Germany / Japan) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X-Axis Travel | 60 mm (2.4 in) |
| Z-Axis Travel | 1,100 mm (43.3 in) |
| Max Workpiece Diameter | 120 mm (4.7 in) |
| Max Workpiece Length | 1,055 mm (41.5 in) |
| Distance Between Centers | 19.7 in / 39.4 in |
| Machine Height | 59.1 in (/500); 63.3 in (/1000) |
| Floor Space | Approx. 30.1 ft2 (/500); approx. 49.52 ft2 (/1000) |
| Driven Tools | Milling tools on Turret 1 and Turret 2 as an option |
According to secondary market equipment benchmarks for November 2026, the DMG MORI NZX-S 1500 is estimated between $38,500 and $78,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $597 / month.
Up to 120 mm (4.7 in) in diameter and 1,055 mm (41.5 in) long. The axis travels are 60 mm (2.4 in) in X and 1,100 mm (43.3 in) in Z. The machine is offered in two distances between centers, 19.7 in and 39.4 in, so check which length the listed limits apply to on the machine quoted.
According to secondary market equipment benchmarks for November 2026, the DMG MORI NZX-S 1500 is estimated between $38,500 and $78,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $597 / month.
Only as an option. DMG MORI states that milling tools can be mounted on Turret 1 and Turret 2 as an option. The table for this model lists X and Z travel only, with no Y travel, so any milling has to be done without a Y move.
The NZX-S 1500 is narrower and longer. It has 60 mm (2.4 in) of X travel and 1,100 mm (43.3 in) of Z, with no Y travel listed. The NZX 1500 has 210 mm (8.3 in) of X, 110 mm (4.3 in) of Y and 810 mm (31.9 in) of Z.
DMG MORI lists a three-point support system as part of the structure, alongside a layout that is symmetrical about the center of the spindle to disperse heat evenly. A machine resting on three points sits stable without the bed being twisted by an uneven floor.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.