The DMG MORI SL-403 is an industrial-grade CNC Lathes & Turning Centers powered by the Standard CNC. and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
DMG MORI SL-403 turning center: 650 mm (25.6 in) diameter, 185 mm bar, Type 800 or Type 2000 beds, parts to 2,158 mm long, 944.9 ipm Z rapid.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | DMG MORI (Germany / Japan) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X-Axis Travel | 345 mm (13.6 in) |
| Max Workpiece Diameter | 650 mm (25.6 in) |
| Max Bar Capacity | 185 mm (7.3 in) |
| Z-Axis Travel | 995 mm (39.2 in) [Type 800] / 2,000 mm (78.7 in) [Type 2000] |
| Max Workpiece Length | 958 mm (37.7 in) [Type 800] / 2,158 mm (85 in) [Type 2000] |
| Max Turning Diameter | 24.4 in. (B, C); 25.5 in. (BMC, CMC) |
| Rapid Traverse | X-axis: 787.4 ipm; Z-axis: 944.9 ipm |
| Turret Indexing Time | 0.4 sec. (1-station) |
| Tailstock Travel | 33.5 in. (800 type); 78.7 in. (2,000 type) |
| Oil Chiller | Standard equipment (C-type) |
According to secondary market equipment benchmarks for November 2026, the DMG MORI SL-403 is estimated between $37,500 and $76,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $581 / month.
Bed length. Type 800 has 995 mm (39.2 in) of Z travel and a maximum workpiece length of 958 mm (37.7 in). Type 2000 has 2,000 mm (78.7 in) of Z travel and a maximum workpiece length of 2,158 mm (85 in). Tailstock travel is 33.5 in on the 800 type and 78.7 in on the 2,000 type. X travel is 345 mm (13.6 in) on both.
It depends on the version. DMG MORI gives 24.4 in for the B and C versions and 25.5 in for the BMC and CMC versions. The technical data table lists a maximum workpiece diameter of 650 mm (25.6 in) for the model.
Rapid traverse is 787.4 ipm on the X-axis and 944.9 ipm on the Z-axis. Turret indexing time is 0.4 sec for one station. On a long shaft with few tool changes the Z rapid matters most, since the turret travels the length of the part between cuts.
DMG MORI's table for the SL-403 lists X travel of 345 mm (13.6 in) and Z travel only. No Y travel is given. If off-centre milling is needed, the NLX 4000 is listed with 120 mm (4.7 in) of Y travel.
DMG MORI states that an oil chiller is included as standard equipment on the C-type. Nothing is stated for the other versions, so check the quotation if the machine being considered is not a C-type.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.