The DMG MORI SL-603 is an industrial-grade CNC Lathes & Turning Centers powered by the Standard CNC. and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
DMG MORI SL-603 heavy lathe: 930 mm (36.6 in) diameter, four beds to 4,150 mm Z, parts to 4,000 mm long, spindle holes up to 14.6 in.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | DMG MORI (Germany / Japan) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X-Axis Travel | 485 mm (19.1 in) |
| Max Workpiece Diameter | 930 mm (36.6 in) |
| Max Bar Capacity | 375 mm (14.8 in) |
| Z-Axis Travel | 1,150 mm (45.3 in) [Type 1000] / 2,150 mm (84.6 in) [Type 2000] / 3,150 mm (124 in) [Type 3000] / 4,150 mm (163.4 in) [Type 4000] |
| Max Workpiece Length | 1,000 mm (39.4 in) [Type 1000] / 2,000 mm (78.7 in) [Type 2000] / 3,000 mm (118.1 in) [Type 3000] / 4,000 mm (157.5 in) [Type 4000] |
| Through Spindle Hole | B: φ7.1 in.; C: φ10.8 in.; D: φ14.6 in. |
| Turret Indexing Time | 0.4 sec. (each station) |
| Guideways | Slideways on all axes |
According to secondary market equipment benchmarks for November 2026, the DMG MORI SL-603 is estimated between $37,500 and $76,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $581 / month.
Four. Type 1000 has 1,150 mm (45.3 in) of Z travel for workpieces up to 1,000 mm (39.4 in) long. Type 2000 has 2,150 mm (84.6 in) for 2,000 mm (78.7 in). Type 3000 has 3,150 mm (124 in) for 3,000 mm (118.1 in). Type 4000 has 4,150 mm (163.4 in) for 4,000 mm (157.5 in). X travel is 485 mm (19.1 in) on all of them.
DMG MORI lists three variations in through-spindle hole diameter: B at 7.1 in, C at 10.8 in and D at 14.6 in. The table gives a maximum bar capacity of 375 mm (14.8 in), which can only apply to the largest bore, so confirm the bore letter on the quotation.
Both have 485 mm (19.1 in) of X travel. The NLX 6000 has 200 mm (7.9 in) of Y travel and 2,150 mm (84.6 in) of Z. The SL-603 table lists no Y travel, but the machine is built in four lengths, up to 4,150 mm (163.4 in) of Z on Type 4000.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.