The DMG MORI SPRINT 65 is an industrial-grade CNC Lathes & Turning Centers powered by the Standard CNC. a top spindle speed of 5,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
DMG MORI SPRINT 65: 65 mm (2.6 in) bar, 420 mm Z, main spindle 110.6 ft lb and 29.5 hp, driven tools to 12,000 rpm, up to 36 tool stations.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | DMG MORI (Germany / Japan) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 5,000 RPM |
| Spindle Motor Rating | 29.5 kW |
| Spindle Taper Interface | Standard |
| Automatic Tool Changer (ATC) | 36 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X-Axis Travel | 165 mm (6.5 in) |
| Y-Axis Travel | 80 mm (3.1 in) |
| Z-Axis Travel | 420 mm (16.5 in) |
| Max Workpiece Diameter | 175 mm (6.9 in) |
| Max Workpiece Length | 420 mm (16.5 in) |
| Max Bar Capacity | 65 mm (2.6 in) |
| Max Spindle Speed | 5,000 rpm (main spindle) |
| Spindle Motor Power | 29.5 hp (nominal), main spindle |
| Spindle Torque | 110.6 ft lb (nominal), main spindle |
| Sub Spindle Speed | 5,000 rpm, 63.4 ft lb, 24.1 hp (nominal), counter spindle |
| Tool Capacity | Up to 36 tool stations |
| Turret Stations | 12 VDI 30 tool stations with Trifix per turret, each can be driven |
| Driven Tool Speed | Up to 12,000 rpm, 8.9 ft lb, 8.7 hp (nominal) |
| Turrets | SIEMENS: 2 turrets twin concept, 3 turrets, or 3 turrets plus B-axis; FANUC: 3 turrets |
According to secondary market equipment benchmarks for November 2026, the DMG MORI SPRINT 65 is estimated between $49,000 and $96,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $760 / month.
Bar capacity is 65 mm (2.6 in). The maximum workpiece is 175 mm (6.9 in) in diameter and 420 mm (16.5 in) long, which equals the Z travel. X travel is 165 mm (6.5 in) and Y travel 80 mm (3.1 in).
No. Both run at 5,000 rpm, but the main spindle is rated 110.6 ft lb and 29.5 hp (nominal) and the counter spindle 63.4 ft lb and 24.1 hp (nominal). Put the heavy stock removal on the main spindle and keep the counter spindle for the lighter back-side work. DMG MORI states that both are water-cooled.
The driven tool spindles are rated up to 12,000 rpm, 8.9 ft lb and 8.7 hp (nominal). All 12 VDI 30 tool stations of a turret can be driven. With that much speed and modest torque, the driven tools are best matched to small-diameter cutters.
Yes, as one of the SIEMENS models, which are a 2-turret twin concept, 3 turrets, and 3 turrets plus B-axis. The B-axis has a torque motor and a direct measuring system. The FANUC model is 3 turrets, with MAPPS V.
X travel is 165 mm (6.5 in) on both. The SPRINT 65 has 80 mm (3.1 in) of Y and 420 mm (16.5 in) of Z; the SPRINT 50 has 70 mm (2.8 in) of Y and 235 mm (9.3 in) of Z. The SPRINT 65 takes bar up to 65 mm (2.6 in) and parts up to 175 mm (6.9 in) in diameter.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.