The DMG MORI ULTRASONIC 210 p is an industrial-grade 5-Axis Machining Centers powered by the Standard CNC. and a 5-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
DMG MORI ULTRASONIC 210 p: 2,100 x 2,100 x 1,250 mm travels, parts to 8,000 kg, gear spindle with 1,327.6 ft lb, magazine with up to 303 tools.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | DMG MORI (Germany / Japan) |
| Machine Type | 5-Axis Machining Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 5-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Automatic Tool Changer (ATC) | 303 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Max Workpiece Length | 3,200 mm (126 in) |
| Max Workpiece Width | 2,500 mm (98.4 in) |
| Max Workpiece Height | 1,460 mm (57.5 in) |
| Max Workpiece Weight | 8,000 kg (17,637 lb) |
| X-Axis Travel | 2,100 mm (82.7 in) |
| Y-Axis Travel | 2,100 mm (82.7 in) |
| Z-Axis Travel | 1,250 mm (49.2 in) |
| Feed Force | Up to 8,992.4 lbf |
| Tool Capacity | Up to 303 tools (wheel type magazine) |
| Spindle Torque | Up to 737.6 ft lb (powerMASTER motor spindle); 1,327.6 ft lb (torqueMASTER gear spindle) |
| Feed Speed Max | Up to 2,362.2 ipm |
| Axis Acceleration | Up to 19.7 ft/s² |
| Coolant Tank | Band filter unit with 980 l as standard |
| Ultrasonic Interface | HSK-A63 / HSK-A100 / HSK-E50 actuator system |
According to secondary market equipment benchmarks for November 2026, the DMG MORI ULTRASONIC 210 p is estimated between $121,500 and $250,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $1,883 / month.
Travels are 2,100 mm (82.7 in) in X, 2,100 mm (82.7 in) in Y and 1,250 mm (49.2 in) in Z. The workpiece can be up to 3,200 mm (126 in) long, 2,500 mm (98.4 in) wide, 1,460 mm (57.5 in) high and 8,000 kg (17,637 lb). Length and width both exceed the travels, so confirm which areas of a large part the spindle can reach.
DMG MORI names two: a powerMASTER motor spindle with up to 737.6 ft lb and a torqueMASTER gear spindle with 1,327.6 ft lb. The Highlights state torque only. Speed and power have to be requested for each spindle, and the choice between them is a choice between speed range and low-speed torque.
DMG MORI states that no foundation is required, because the machine stands on a 3-point support with an inherently stiff machine bed. The floor still has to bear the machine together with a workpiece of up to 8,000 kg (17,637 lb), so have the floor loading checked against the installation drawing.
The Highlights describe a wheel type magazine with up to 303 tools and a minimized footprint. That is the upper figure. The capacity supplied as standard is not stated, so the magazine size should be listed explicitly in the quotation.
Three levels: the standard machine, described as having high temperature stability; an accuracy pack option; and a high precision variant named µPrecision. Supporting measures are a water-cooled feed drive, cooled linear guideways and active spindle growth control. Request the positioning accuracy for the level you intend to order.
Technology integration is via an HSK-A63 / HSK-A100 / HSK-E50 actuator system. It includes automatic frequency detection and adaption, amplitude regulation and automatic feed adjustment. DMG MORI states up to 50% reduced process forces, allowing higher feeds, better surface finishes and longer tool life.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.