The DMG MORI ULTRASONIC 65 is an industrial-grade 5-Axis Machining Centers powered by the Standard CNC. a top spindle speed of 30,000 RPM, and a 5-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
DMG MORI ULTRASONIC 65: monoBLOCK 5-axis machine with 735 x 650 x 560 mm travels, parts to 840 mm diameter and 1,000 kg, spindles up to 30,000 rpm.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | DMG MORI (Germany / Japan) |
| Machine Type | 5-Axis Machining Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 5-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 30,000 RPM |
| Spindle Taper Interface | Standard |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Max Workpiece Diameter | 840 mm (33.1 in) |
| Max Workpiece Height | 500 mm (19.7 in) |
| Max Workpiece Weight | 1,000 kg (2,204.6 lb) |
| X-Axis Travel | 735 mm (28.9 in) |
| Y-Axis Travel | 650 mm (25.6 in) |
| Z-Axis Travel | 560 mm (22 in) |
| Max Spindle Speed | Up to 30,000 rpm (spindle range) |
| Ultrasonic Interface | HSK-A63 / HSK-E50 actuator system |
According to secondary market equipment benchmarks for November 2026, the DMG MORI ULTRASONIC 65 is estimated between $131,000 and $269,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $2,031 / month.
The technical data gives a maximum workpiece weight of 1,000 kg (2,204.6 lb), for a part up to 840 mm (33.1 in) in diameter and 500 mm (19.7 in) high. DMG MORI lists more than one table solution, so have the load rating of the table on your quotation confirmed in writing and include the fixture in the total.
735 mm (28.9 in) in X, 650 mm (25.6 in) in Y and 560 mm (22 in) in Z. The 840 mm (33.1 in) maximum workpiece diameter is greater than the X travel because the rotary table turns the part, so the far side is machined after indexing.
DMG MORI's Highlights describe it as stability from one casting. The listed elements are a one-piece column with large, stable slideways, FEM optimization of all components, and clamping of the swivelling rotary table. The machine rests on a three-point support for setup.
Technology integration is through an HSK-A63 / HSK-E50 actuator system. The system detects and adapts the frequency automatically, regulates the amplitude and adjusts the feed automatically. DMG MORI states up to 50% reduced process forces with it.
The ULTRASONIC 85 is larger in every axis: 935 mm (36.8 in) in X, 850 mm (33.5 in) in Y and 650 mm (25.6 in) in Z, against 735 mm (28.9 in), 650 mm (25.6 in) and 560 mm (22 in) on this machine. Choose by part size, and by whether the 1,000 kg (2,204.6 lb) limit here is enough.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.