The DMG MORI Wasino A-18S is an industrial-grade CNC Lathes & Turning Centers powered by the Standard CNC. and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
DMG MORI Wasino A-18S turning center: 180 x 100 x 350 mm X/Y/Z travels, parts to 240 mm diameter, 67 mm bar capacity, 18 tools.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | DMG MORI (Germany / Japan) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Automatic Tool Changer (ATC) | 18 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X-Axis Travel | 180 mm (7.1 in) |
| Y-Axis Travel | 100 mm (3.9 in) |
| Z-Axis Travel | 350 mm (13.8 in) |
| Max Workpiece Diameter | 240 mm (9.4 in) |
| Max Workpiece Length | 245 mm (9.6 in) |
| Max Bar Capacity | 67 mm (2.6 in) |
| Circularity | 0.8 μm |
| Tool Capacity | 18 tools |
| Thermal Displacement | ø 4.0 μm (at cold start) |
| Bed Type | Horizontal bed |
According to secondary market equipment benchmarks for November 2026, the DMG MORI Wasino A-18S is estimated between $36,500 and $75,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $566 / month.
DMG MORI lists a maximum workpiece diameter of 240 mm (9.4 in) and a maximum workpiece length of 245 mm (9.6 in). Bar capacity is 67 mm (2.6 in). The axes travel 180 mm (7.1 in) in X, 100 mm (3.9 in) in Y and 350 mm (13.8 in) in Z, so Z is longer than the longest part and leaves room for tool approach.
DMG MORI states 18 tools. The Highlights do not say how those positions divide between fixed and driven tools, and they give no shank size. If a job needs several driven tools at once, ask for the tool layout before ordering.
A thermal displacement at cold start of ø 4.0 μm and a circularity of 0.8 μm. DMG MORI ties these to stainless steel covers and to a pre-tensioned ball screw with the nut attached at the center of the elongation. No positioning accuracy or repeatability figure is published.
Not by travel. The Wasino A 150Y|18 and the Wasino A 150SY|15 are both listed with 180 mm (7.1 in) of X, 100 mm (3.9 in) of Y and 350 mm (13.8 in) of Z, the same as the Wasino A-18S. The travel figures do not separate the three, so the difference has to be taken from the configuration DMG MORI quotes for each.
Yes. DMG MORI lists a loader stocker system for the machine, together with further applications and peripheral devices. Stock up to 67 mm (2.6 in) can also be run as bar. Which of these belongs to a given machine depends on the quotation, since they are listed as expansion possibilities.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.