The DMG MORI Wasino GG-5 is an industrial-grade CNC Lathes & Turning Centers powered by the Standard CNC. and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
DMG MORI Wasino GG-5: two-spindle lathe for parts up to 50 mm diameter and 40 mm long, 200 mm X and 220 mm Z travel, 45 mm bar capacity.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | DMG MORI (Germany / Japan) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X-Axis Travel | 200 mm (7.9 in) |
| Z-Axis Travel | 220 mm (8.7 in) |
| Max Workpiece Diameter | 50 mm (2 in) |
| Max Workpiece Length | 40 mm (1.6 in) |
| Max Bar Capacity | 45 mm (1.8 in) |
| Number Of Spindles | Two spindles (front and rear faces in one process) |
| Thermal Displacement | φ 5.0 μm (at cold start) |
According to secondary market equipment benchmarks for November 2026, the DMG MORI Wasino GG-5 is estimated between $44,000 and $86,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $682 / month.
DMG MORI lists a maximum workpiece diameter of 50 mm (2 in) and a maximum workpiece length of 40 mm (1.6 in). Bar stock up to 45 mm (1.8 in) can be used. X travel is 200 mm (7.9 in) and Z travel is 220 mm (8.7 in), so the axes reach well beyond the part itself.
So that both ends of a part are finished on one machine. DMG MORI describes the two spindles as allowing the front and rear faces to be machined in one process. For parts up to 40 mm (1.6 in) long, that removes the second operation and the handling between machines that a single-spindle lathe would need.
They are different kinds of lathe. The Wasino A-18S travels 180 mm (7.1 in) in X, 100 mm (3.9 in) in Y and 350 mm (13.8 in) in Z, so it has a Y axis and a longer Z. The Wasino GG-5 lists no Y axis, travels 200 mm (7.9 in) in X and 220 mm (8.7 in) in Z, and is limited to parts 50 mm (2 in) in diameter and 40 mm (1.6 in) long.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.