The DMG MORI Wasino jj 1 is an industrial-grade CNC Lathes & Turning Centers powered by the Standard CNC. and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
DMG MORI Wasino jj 1: two spindles and two turrets for front and rear faces in one process, parts to 100 mm (3.9 in), bar to 45 mm (1.8 in).
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | DMG MORI (Germany / Japan) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X-Axis Travel | 147.5 mm (5.8 in) |
| Z-Axis Travel | 170 mm (6.7 in) |
| Max Workpiece Diameter | 100 mm (3.9 in) |
| Max Workpiece Length | 100 mm (3.9 in) |
| Max Bar Capacity | 45 mm (1.8 in) |
| Configuration | Two spindles and two turrets |
| Automation | Loader/stocker systems |
According to secondary market equipment benchmarks for November 2026, the DMG MORI Wasino jj 1 is estimated between $37,500 and $76,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $581 / month.
Workpieces up to 100 mm (3.9 in) in diameter and 100 mm (3.9 in) long, and bar up to 45 mm (1.8 in). X travel is 147.5 mm (5.8 in) and Z travel is 170 mm (6.7 in). No Y travel is listed.
So that the front and rear faces of a part are machined in one process. DMG MORI states that this shortens the time needed to complete a part. In practice the second operation follows the first inside the machine, and the part comes out finished on both sides without being re-chucked by hand.
Yes. DMG MORI lists loader/stocker systems for a wide range of production needs and peripheral equipment for various manufacturing environments. With parts of at most 100 mm (3.9 in) in diameter and length, a loader keeps both spindles supplied on short cycles.
DMG MORI's table lists X travel of 147.5 mm (5.8 in) and Z travel of 170 mm (6.7 in) only, and no rotary tool figures are published for the model. If Y-axis work is required, the SPRINT 50 is listed with 70 mm (2.8 in) of Y travel and 235 mm (9.3 in) of Z.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.