The DMG MORI CTX Gamma 3000 TC 4A is an industrial-grade Multi-Tasking & Mill-Turn Machines powered by the CELOS with Siemens 840D solutionline. a top spindle speed of 0 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
DMG MORI CTX Gamma 3000 TC 4A: listed 700 mm (27.6 in) turning diameter, 3,050 mm Z travel, 1,550 Nm main spindle, VDI 60 lower turret. Not current.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | DMG MORI (Germany / Japan) |
| Machine Type | Multi-Tasking & Mill-Turn Machines |
| CNC Controller System | CELOS with Siemens 840D solutionline |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 35,000 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Max Turning Diameter | 700 mm (27.6 in) |
| Max Swing Diameter | Approximately 720 mm (28.3 in) |
| Max Turning Length | 3,050 mm (120.1 in) |
| Chuck Size | 15 in (380 mm) |
| Main Spindle Speed | 3,500 RPM |
| Main Spindle Power | 52 kW (70 hp) |
| Main Spindle Torque | 1,550 Nm |
| Turn Mill Spindle Speed | 12,000 RPM (20,000 RPM optional) |
| Turn Mill Spindle Power | 36 kW (48 hp) |
| Turn Mill Spindle Torque | 220 Nm |
| Turn Mill Spindle Interface | HSK-A63 |
| B Axis Swivel | +/-120 degrees (240 total), direct-drive |
| Lower Turret | VDI 60, 12 stations (4A configuration) |
| Upper Tool Magazine | 36 standard / 80 / 120 / 180 (chain magazine) |
| Sub Spindle | Optional, 45 kW / 4,000 RPM |
| Rapid Traverse | 50 m/min (1,969 ipm); 60 m/min Z optional |
| Bed Construction | Mineral cast (GILDEMEISTER Casting) |
| Machine Weight | Approximately 35,000 kg (77,162 lb) |
| Floor Space | Approximately 7,500 x 3,200 mm |
| CNC Control | CELOS with Siemens 840D solutionline |
| X-Axis Travel | 800 mm (31 in) |
| Y-Axis Travel | 420 mm (17 in) |
| Z-Axis Travel | 3,050 mm (120 in) |
| Max Workpiece Diameter | 700 mm (28 in) |
| Max Workpiece Length | 3,000 mm (118 in) |
| Max Bar Capacity | 127 mm (5 in) |
Our best estimate for the DMG Mori CTX Gamma 3000 TC 4A is $1,200,000 - $1,800,000. This is an estimate for a mill-turn / multi-tasking machines in this class, not a quote from DMG Mori; configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/dmg-mori-ctx-gamma-3000-tc-4a#price; the request is passed to DMG Mori or an authorised dealer.
No. It is not in DMG MORI's current lineup. The current CTX gamma 3000 TC has the same travels, 800 mm (31.5 in) in X, 420 mm (16.5 in) in Y and 3,050 mm (120.1 in) in Z. Use the figures on this page as listed figures and confirm them on the machine.
A main spindle of 3,500 rpm, 52 kW (70 hp) and 1,550 Nm, and a turn-mill spindle of 12,000 rpm (20,000 rpm optional), 36 kW (48 hp) and 220 Nm with an HSK-A63 interface. A sub-spindle of 45 kW and 4,000 rpm is listed as an option.
Two. The B-axis turn-mill spindle is direct-drive and swivels +/-120 degrees, 240 degrees in total, and takes tools from an upper magazine of 36 as standard or 80, 120 or 180 in a chain magazine. The lower turret is listed as VDI 60 with 12 stations.
Whether the optional sub-spindle and the 20,000 rpm turn-mill spindle are fitted, which magazine size it has, and whether the 60 m/min Z rapid option was ordered. Also confirm the maximum workpiece length, since the listed figures for it do not agree, and plan transport around the listed weight of approximately 35,000 kg (77,162 lb).
