The DMG MORI DMC 270 u FD is an industrial-grade 5-Axis Machining Centers powered by the Standard CNC. a top spindle speed of 0 RPM, and a 5-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
DMG MORI DMC 270 u FD: gantry 5-axis mill-turn center, 2,700 x 2,700 x 1,600 mm travels, parts to 3,400 mm diameter and 9,000 kg, pallet changer.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | DMG MORI (Germany / Japan) |
| Machine Type | 5-Axis Machining Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 5-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Automatic Tool Changer (ATC) | 243 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Max Workpiece Diameter | 3,400 mm (133.9 in) |
| Max Workpiece Height | 1,620 mm (63.8 in) |
| Max Workpiece Weight | 9,000 kg (19,841.6 lb) |
| X-Axis Travel | 2,700 mm (106.3 in) |
| Y-Axis Travel | 2,700 mm (106.3 in) |
| Z-Axis Travel | 1,600 mm (63 in) |
| Pallet Changer | Pallet changer as standard |
| Tool Capacity | up to 243 tools (wheel type magazine) |
| Table Torque | up to 8,113.2 ft lb (DirectDrive table) |
| Spindle Torque | up to 737.6 ft lb (powerMASTER motor spindle); 1,327.6 ft lb (torqueMASTER gear spindle) |
| Feed Speed Max | up to 2,362.2 ipm |
| Coolant Tank | Band filter unit with 2,500 l as standard |
Our best estimate for the DMG Mori DMC 270 u FD is $3,000,000 - $4,500,000. This is an estimate for a 5-axis machining centers in this class, not a quote from DMG Mori; configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/dmg-mori-dmc-270-u-fd#price; the request is passed to DMG Mori or an authorised dealer.
Up to 3,400 mm (133.9 in) in diameter, 1,620 mm (63.8 in) in height and 9,000 kg (19,841.6 lb). The linear travels are 2,700 mm (106.3 in) in X and Y and 1,600 mm (63 in) in Z. The diameter can exceed the horizontal travel because the table rotates the part under the spindle.
Yes. DMG MORI describes milling and turning in one setup with the DirectDrive table, which has a torque of up to 8,113.2 ft lb. Grinding is listed as an integrated technology as well, so a turned and milled part can be finished without moving it to another machine.
DMG MORI names two: a powerMASTER motor spindle with up to 737.6 ft lb and a torqueMASTER gear spindle with 1,327.6 ft lb. The gear spindle carries about 80% more torque. Spindle speed and power are not part of the listed figures, so ask for both when you request a quotation.
It is the middle size. The DMC 210 u FD has 2,100 × 2,100 × 1,250 mm (82.7 × 82.7 × 49.2 in) of travel, the DMC 270 u FD 2,700 × 2,700 × 1,600 mm (106.3 × 106.3 × 63 in), and the DMC 340 u FD 3,400 × 3,400 × 2,000 mm (133.9 × 133.9 × 78.7 in).
The pallet changer is listed as standard; DMG MORI describes it as allowing setup parallel to machining time. The wheel type tool magazine holds up to 243 tools. That figure is the maximum, so confirm the size of the magazine in the offered configuration.
