The DMG MORI NTX 3000 is an industrial-grade Multi-Tasking & Mill-Turn Machines powered by the Standard CNC. a top spindle speed of 0 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
DMG MORI NTX 3000 turn-mill center: 102 mm (4 in) bar, 670 mm max diameter, 1,519 mm length, 675 x 300 x 1,562 mm travels, DDM B-axis.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | DMG MORI (Germany / Japan) |
| Machine Type | Multi-Tasking & Mill-Turn Machines |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X-Axis Travel | 675 mm (26.6 in) |
| Y-Axis Travel | 300 mm (11.8 in) |
| Z-Axis Travel | 1,562 mm (61.5 in) |
| Max Workpiece Diameter | 670 mm (26.4 in) |
| Max Workpiece Length | 1,519 mm (59.8 in) |
| Max Bar Capacity | 102 mm (4 in) |
| Tool Spindle Length | 350 mm (compactMASTER tool spindle) |
| Travel X Range | -125 to +550 mm |
| Travel Y Range | ±150 mm |
| Turret Y Travel | ±40 mm (Turret 2) |
| B Axis Drive | Direct Drive Motor (DDM) |
Our best estimate for the DMG Mori NTX 3000 is $600,000 - $900,000. This is an estimate for a mill-turn / multi-tasking machines in this class, not a quote from DMG Mori; configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/dmg-mori-ntx-3000#price; the request is passed to DMG Mori or an authorised dealer.
Up to 102 mm (4 in). On the same travels the NTX 2500 is limited to 80 mm (3.1 in) and the NTX 2000 to 65 mm (2.6 in), so bar size is the reason to choose this model over the other two.
The axis travels are the same: the NTX 2000 also lists 675 mm (26.6 in) of X, 300 mm (11.8 in) of Y and 1,562 mm (61.5 in) of Z. Maximum workpiece length differs slightly. It is 1,519 mm (59.8 in) on the NTX 3000 and 1,538 mm (60.6 in) on the NTX 2000.
The tool spindle has 300 mm (11.8 in) of Y, stated as ±150 mm. Turret 2 has a separate Y-axis with a stroke of ±40 mm. Off-centre features inside the smaller band can be machined by either carrier; anything further out is work for the tool spindle.
Yes. DMG MORI lists simultaneous 5-axis machining with a Direct Drive Motor (DDM) on the B-axis. Together with X travel that runs from -125 to +550 mm, this lets the tool spindle approach a part at an angle and from beyond the centreline.
Cooling oil is circulated through the spindle motors and the ball screws, which DMG MORI states controls thermal displacement. The page gives no accuracy figure for the model, so ask for the acceptance values if tolerances are tight.
