The DMG MORI DMU 60 FD eVo 2nd Generation is an industrial-grade 5-Axis Machining Centers powered by the Standard CNC. a top spindle speed of 20,000 RPM, and a 5-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
DMG MORI DMU 60 FD eVo 2nd Generation: 750 x 550 x 550 mm travels, 20,000 RPM and 130 Nm standard, up to 30,000 RPM optional, 9 m² footprint.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | DMG MORI (Germany / Japan) |
| Machine Type | 5-Axis Machining Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 5-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 20,000 RPM |
| Spindle Taper Interface | Standard |
| Automatic Tool Changer (ATC) | 30 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Max Workpiece Diameter | 700 mm (27.6 in) |
| Max Workpiece Height | 550 mm (21.7 in) |
| Max Workpiece Weight | 500 kg (1,102.3 lb) |
| X-Axis Travel | 750 mm (29.5 in) |
| Y-Axis Travel | 550 mm (21.7 in) |
| Z-Axis Travel | 550 mm (21.7 in) |
| Tool Capacity | 30, 60 or 120 tools; up to 300 tools |
| Max Spindle Speed | 20,000 rpm as standard; speedMASTER spindles up to 30,000 rpm |
| Spindle Torque | 130 Nm as standard (20,000 rpm spindle); speedMASTER spindles up to 200 Nm |
| Axis Speed Max | 50 m/min (basic version); up to 80 m/min (linear version) |
| Chip To Chip Time | 4.5 seconds |
| Installation Area | 9 m² (with 30, 60 or 120 tools) |
| Double Ballbar Test | 4 µm |
| Guideways | 45 mm linear guides (Z-axis); 3 guideways in Y-axis |
Our best estimate for the DMG Mori DMU 60 FD eVo 2nd Generation is $400,000 - $600,000. This is an estimate for a 5-axis machining centers in this class, not a quote from DMG Mori; configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/dmg-mori-dmu-60-fd-evo-2nd-generation#price; the request is passed to DMG Mori or an authorised dealer.
According to DMG MORI: 28% higher rigidity and accuracy, 40% more working area space compared to the previous machine, 80% higher rigidity of the Z-axis with 45 mm linear guides, and a 60% larger opening of the chip conveyor. The bed is a single piece hybrid design made of mineral casting with three guideways in the Y-axis. These are comparisons with the earlier model made by the manufacturer.
The footprint is 9 m². DMG MORI states that the installation area is the same whether the machine has 30, 60 or 120 tools, so choosing a larger magazine within that range does not change the layout.
The standard spindle runs at 20,000 RPM with 130 Nm. Optional speedMASTER spindles reach up to 30,000 RPM or up to 200 Nm. A high-speed spindle and a high-torque spindle are different units, so decide between them by whether the shop mainly finishes with small tools or roughs tough materials.
Travels are 750 mm (29.5 in) in X, 550 mm (21.7 in) in Y and 550 mm (21.7 in) in Z. The largest workpiece is 700 mm (27.6 in) in diameter and 550 mm (21.7 in) in height, at up to 500 kg (1,102.3 lb).
The DMU 75 monoBLOCK 2nd Generation has the same 750 mm (29.5 in) of X travel, with 650 mm (25.6 in) of Y and 560 mm (22 in) of Z. The DMU 60 FD eVo 2nd Generation has 550 mm (21.7 in) in both Y and Z, and its listed data states a 20,000 RPM, 130 Nm standard spindle.
