The DMG MORI ecoMill 70 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Siemens Sinumerik 828D / Fanuc 0i-MF. a top spindle speed of 15,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
DMG MORI ecoMill 70: listed with 700 × 500 × 450 mm travels, 800 x 500 mm table for 500 kg, 15,000 rpm SK40 spindle and 24 tools.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | DMG MORI (Germany / Japan) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Siemens Sinumerik 828D / Fanuc 0i-MF |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 15,000 RPM |
| Spindle Motor Rating | 11.0 kW |
| Spindle Taper Interface | SK40 |
| Table / Platter / Chuck Size | 800 x 500 mm (31.5 x 19.7 in) |
| Automatic Tool Changer (ATC) | 24 Tool Stations |
| Approx. Machine Weight | 5,200 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X-Axis Travel | 700 mm (27.6 in) |
| Y-Axis Travel | 500 mm (19.7 in) |
| Z-Axis Travel | 450 mm (17.7 in) |
| Max Spindle Speed | 15,000 RPM |
| Spindle Taper | SK40 |
| Spindle Motor Power | 11 kW (14.8 hp) |
| Spindle Torque | 70 Nm |
| Table Size | 800 x 500 mm (31.5 x 19.7 in) |
| Table Load Capacity | 500 kg (1,102 lb) |
| Rapid Traverse | 36 m/min (1,417 ipm) |
| Tool Capacity | 24 (30 optional) |
| Positioning Accuracy | 0.008 mm (8 µm) |
| Machine Weight | 5,200 kg (11,464 lb) |
| CNC Control | Siemens Sinumerik 828D / Fanuc 0i-MF |
Our best estimate for the DMG Mori ecoMill 70 is $95,000 - $135,000. This is an estimate for a vertical machining centers (vmc) in this class, not a quote from DMG Mori; configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/dmg-mori-ecomill-70#price; the request is passed to DMG Mori or an authorised dealer.
Size. The ecoMill 70 is listed with 700 × 500 × 450 mm of travel, an 800 x 500 mm table and 24 tools. The ecoMill 50 is listed with 500 × 400 × 400 mm, a 600 x 400 mm table and 20 tools. The listed spindle figures are the same for both: 15,000 rpm, 11 kW (14.8 hp) and 70 Nm, with a 36 m/min (1,417 ipm) rapid traverse.
It is not in the current lineup and is probably an older model, which means a buyer is assessing a machine that already exists. Ask for its manual and data plate and compare them with the listed figures here, starting with the travels of 700 × 500 × 450 mm, the SK40 taper and the control fitted.
The table is listed at 800 x 500 mm (31.5 x 19.7 in) with a load of 500 kg (1,102 lb). Its 500 mm depth matches the Y travel. Its length is greater than the 700 mm (27.6 in) of X travel, so a fixture that fills the table cannot be reached over its whole length.
The listed magazine holds 24 tools, with 30 as an option, and the spindle taper is SK40. Tool length, diameter and weight limits are not among the listed figures. Since the magazine size was chosen when the machine was built, check which one is fitted.
The listed weight is 5,200 kg (11,464 lb), the figure a rigger and the floor plan need. The control is listed as Siemens Sinumerik 828D or Fanuc 0i-MF. Only one is installed on any given machine, so confirm it before assuming existing programs will run.
