The DMG MORI LASERTEC 12 SLM is an industrial-grade Fiber Laser Cutting Machines powered by the Standard CNC. a top spindle speed of 0 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
DMG MORI LASERTEC 12 SLM: powder bed machine with 125 x 125 x 200 mm build volume, 35 µm focus diameter, 20 µm layers, 200 W laser (400 W option).
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | DMG MORI (Germany / Japan) |
| Machine Type | Fiber Laser Cutting Machines |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Focus Diameter | 35 µm (0.0014 in) |
| Min Layer Thickness | 20 µm (0.0008 in) |
| Laser Power | 200 W |
| X-Axis Travel | 125 mm (4.9 in) |
| Y-Axis Travel | 125 mm (4.9 in) |
| Z-Axis Travel | 200 mm (7.9 in) |
| Build Volume | 4.9 x 4.9 x 7.9 in. (X / Y / Z) |
| Material Change Time | < 2 hours (contamination-free change between different materials) |
| Filter System | Duo filter system (filter change without process interruption) |
| Powder Module Option | rePLUG RESEARCH additional powder module (optional) |
The price estimate for the DMG Mori LASERTEC 12 SLM is uncertain: we have no price for it that we can cite and no estimate we can stand behind, so we give no figure. Configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/dmg-mori-lasertec-12-slm#price; the request is passed to DMG Mori or an authorised dealer.
The build volume is 125 × 125 × 200 mm (4.9 × 4.9 × 7.9 in) in X, Y and Z. Several different designs can be built side by side in one job, but nothing larger than that envelope fits. The LASERTEC 30 SLM, at 325 × 325 × 400 mm (12.8 × 12.8 × 15.7 in), is the larger machine.
A fibre laser, with 200 W as standard and 400 W optional. DMG MORI describes the sources as application-specific. The focus diameter is 35 µm (0.0014 in), and the minimum layer thickness is 20 µm (0.0008 in).
DMG MORI states a contamination-free change between different materials in under 2 hours. That works because each rePLUG powder module is dedicated to one material and contains its own closed powder cycle, so the powder circuit is exchanged as a unit when the alloy changes.
Yes. DMG MORI describes the LASERTEC 12 SLM as an open system: all machine settings and process parameters can be adjusted individually and the material supplier can be chosen without restriction. The optional rePLUG RESEARCH powder module is intended for material and parameter development on the series machine.
No manual refilling is required during the process, according to DMG MORI, because the powder reservoir is large. The duo filter system also allows a filter to be changed without interrupting the process, and powder recycling is integrated in the closed material cycle.
