The DMG MORI NTX 2000 is an industrial-grade Multi-Tasking & Mill-Turn Machines powered by the Standard CNC. a top spindle speed of 0 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
DMG MORI NTX 2000 turn-mill center: 675 x 300 x 1,562 mm travels, 670 mm max diameter, 1,538 mm length, 65 mm bar, DDM B-axis for 5-axis work.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | DMG MORI (Germany / Japan) |
| Machine Type | Multi-Tasking & Mill-Turn Machines |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X-Axis Travel | 675 mm (26.6 in) |
| Y-Axis Travel | 300 mm (11.8 in) |
| Z-Axis Travel | 1,562 mm (61.5 in) |
| Max Workpiece Diameter | 670 mm (26.4 in) |
| Max Workpiece Length | 1,538 mm (60.6 in) |
| Max Bar Capacity | 65 mm (2.6 in) |
| Tool Spindle Length | 350 mm (compactMASTER tool spindle) |
| Travel X Range | -125 to +550 mm |
| Travel Y Range | ±150 mm |
| Turret Y Travel | ±40 mm (Turret 2) |
| B Axis Drive | Direct Drive Motor (DDM) |
Our best estimate for the DMG Mori NTX 2000 is $400,000 - $600,000. This is an estimate for a mill-turn / multi-tasking machines in this class, not a quote from DMG Mori; configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/dmg-mori-ntx-2000#price; the request is passed to DMG Mori or an authorised dealer.
Bar capacity, not travel. All three list 675 mm (26.6 in) of X, 300 mm (11.8 in) of Y and 1,562 mm (61.5 in) of Z. The NTX 2000 takes bar up to 65 mm (2.6 in). The NTX 2500 takes 80 mm (3.1 in) and the NTX 3000 takes 102 mm (4 in).
X is 675 mm (26.6 in), given as -125 to +550 mm. Y is 300 mm (11.8 in), or ±150 mm. Z is 1,562 mm (61.5 in). The largest workpiece is 670 mm (26.4 in) in diameter and 1,538 mm (60.6 in) long, and bar capacity is 65 mm (2.6 in).
DMG MORI's Highlights refer to both. Turret 2 has a Y-axis stroke of ±40 mm. Spindle 2 is described as making 6-face machining available, so that components are completed on one machine. Because the wording is available, check that Spindle 2 is included in the machine you are quoted.
The compactMASTER tool spindle is 350 mm long, and DMG MORI ties that to the size of the machining envelope. A short milling head uses up less of the 675 mm X stroke when the B-axis tilts it, leaving more room for the tool and the part.
Cooling oil circulates in the spindle motors and the ball screws, the two main heat sources in the drive train. DMG MORI states this controls thermal displacement. No accuracy figure is published on the page for this model.
