The DMG MORI NTX 2500 is an industrial-grade Multi-Tasking & Mill-Turn Machines powered by the Standard CNC. a top spindle speed of 0 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
DMG MORI NTX 2500: turn-mill center with 80 mm (3.1 in) bar capacity, 675 x 300 x 1,562 mm travels, 670 mm max diameter and a DDM B-axis.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | DMG MORI (Germany / Japan) |
| Machine Type | Multi-Tasking & Mill-Turn Machines |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X-Axis Travel | 675 mm (26.6 in) |
| Y-Axis Travel | 300 mm (11.8 in) |
| Z-Axis Travel | 1,562 mm (61.5 in) |
| Max Workpiece Diameter | 670 mm (26.4 in) |
| Max Workpiece Length | 1,530 mm (60.2 in) |
| Max Bar Capacity | 80 mm (3.1 in) |
| Tool Spindle Length | 350 mm (compactMASTER) |
| Travel X Range | -125 to +550 mm |
| Travel Y Range | ±150 mm |
| Turret Y Travel | ±40 mm (Turret 2) |
| B Axis Drive | Direct Drive Motor (DDM) |
Our best estimate for the DMG Mori NTX 2500 is $500,000 - $750,000. This is an estimate for a mill-turn / multi-tasking machines in this class, not a quote from DMG Mori; configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/dmg-mori-ntx-2500#price; the request is passed to DMG Mori or an authorised dealer.
Up to 80 mm (3.1 in). That places it between its two frame-mates: the NTX 2000 takes 65 mm (2.6 in) and the NTX 3000 takes 102 mm (4 in). Maximum workpiece diameter for chucked parts is 670 mm (26.4 in).
Not in travel. The NTX 2000 lists the same 675 mm (26.6 in) of X, 300 mm (11.8 in) of Y and 1,562 mm (61.5 in) of Z. The NTX 2500 differs in bar capacity, 80 mm (3.1 in), and in maximum workpiece length, 1,530 mm (60.2 in).
Turret 2 is the second tool carrier and has a Y-axis with a stroke of ±40 mm. That allows milling and drilling off the centreline within that band. The tool spindle has ±150 mm of Y, so features further from centre are left to it.
DMG MORI gives the X-axis stroke as 675 mm, from -125 to +550 mm. The 125 mm on the minus side is travel beyond the zero position, which lets the tool spindle reach across the centreline of the workpiece.
The CLX 450 TC has 750 mm (29.5 in) of X, 200 mm (7.9 in) of Y and 1,100 mm (43.3 in) of Z. The NTX 2500 has 675 mm (26.6 in), 300 mm (11.8 in) and 1,562 mm (61.5 in): less X, but more Y for off-centre milling and more Z for long shafts.
