The DMG MORI NZX 2500 is an industrial-grade CNC Lathes & Turning Centers powered by the Standard CNC. a top spindle speed of 0 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
DMG MORI NZX 2500 lathe: parts to 370 mm (14.6 in) diameter and 1,000 mm long, 1,050 mm Z, slideways on all axes, 10,000 rpm BMT rotary tools.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | DMG MORI (Germany / Japan) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X-Axis Travel | 225 mm (8.9 in) |
| Y-Axis Travel | 120 mm (4.7 in) |
| Z-Axis Travel | 1,050 mm (41.3 in) |
| Max Workpiece Diameter | 370 mm (14.6 in) |
| Max Workpiece Length | 1,000 mm (39.4 in) |
| Driven Tool Speed | 10,000 rpm |
| Driven Tool Torque | Max. 29.5 ft lbf (3 min, option) |
| Turret Type | BMT (Built-in Motor Turret) |
| Guideways | Slideways for all axes |
| Scale Feedback | High-resolution direct scale feedback (option) |
Our best estimate for the DMG Mori NZX 2500 is $300,000 - $480,000. This is an estimate for a cnc lathes / turning centers in this class, not a quote from DMG Mori; configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/dmg-mori-nzx-2500#price; the request is passed to DMG Mori or an authorised dealer.
X travel is 225 mm (8.9 in), Y travel 120 mm (4.7 in) and Z travel 1,050 mm (41.3 in). The maximum workpiece is 370 mm (14.6 in) in diameter and 1,000 mm (39.4 in) long. DMG MORI's table gives no bar capacity for this model.
DMG MORI gives a maximum rotary tool spindle torque of 29.5 ft lbf on a 3 min rating and marks it as an option. No torque is stated for the base machine and no continuous rating is given. The rotary tool spindle speed is 10,000 rpm. Ask for the standard and continuous figures before planning long milling cuts.
Slideways. DMG MORI states that slideways are used for all axes of the NZX 2500. Sliding ways give more damping in heavy and interrupted cuts, which matches a machine sized for parts up to 370 mm (14.6 in) in diameter.
The NZX 2500 has more travel on all three axes: 225 mm (8.9 in) of X, 120 mm (4.7 in) of Y and 1,050 mm (41.3 in) of Z. The NZX 2000 has 210 mm (8.3 in), 110 mm (4.3 in) and 810 mm (31.9 in). The largest difference is in Z.
No. High-resolution direct scale feedback is listed as an option. The base machine relies on what DMG MORI describes as a thermally stable structure, so scales should be added to the quotation when tolerances have to hold over long cycles.
