The Doosan Machine Tools Puma GT 3100 is an industrial-grade CNC Lathes & Turning Centers powered by the Standard CNC. a top spindle speed of 2,800 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Doosan Puma GT 3100: 12 in chuck turning center, 1,613 N·m (1,190 ft-lb), 35 kW (47 hp), 2,800 rpm, 481 mm (19 in) turning diameter.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Doosan Machine Tools (International) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 2,800 RPM |
| Spindle Motor Rating | 35.0 kW |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 5,500 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Chuck Size | 12 in |
| Max Turning Diameter | 481 mm (19 in) |
| Max Turning Length | 755 mm (30 in) |
| Rapid Traverse X | 24 m/min (945 ipm) |
| Rapid Traverse Z | 30 m/min (1,181 ipm) |
| X-Axis Travel | 260 mm (10 in) |
| Z-Axis Travel | 830 mm (33 in) |
| Max Spindle Speed | 2,800 rpm |
| Spindle Motor Power | 35 kW (47 hp) |
| Spindle Torque | 1,613 N·m (1,190 ft-lb) |
| Turret Stations | 10 |
| Footprint | 4,068 × 2,102 × 1,915 mm (160 × 83 × 75 in) |
| Machine Weight | 5,500 kg (12,125 lb) |
According to secondary market equipment benchmarks for November 2026, the Doosan Machine Tools Puma GT 3100 is estimated between $52,000 and $101,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $806 / month.
DN Solutions lists a maximum spindle torque of 1,613 N·m (1,190 ft-lb) and a maximum spindle power of 35 kW (47 hp), with a top speed of 2,800 rpm. The combination favours heavy cuts at large diameters over high surface speed on small ones.
The maximum turning diameter is 481 mm (19 in) and the maximum turning length is 755 mm (30 in), on a 12 in chuck. Axis travel is 260 mm (10 in) in X and 830 mm (33 in) in Z.
The table for this model lists X and Z travel and a 10-station turret, and has no row for driven tools, a Y-axis or a sub-spindle. If a job needs milled or cross-drilled features, confirm with DN Solutions what the machine can be supplied with before planning around it.
The machine measures 4,068 × 2,102 × 1,915 mm (160 × 83 × 75 in) as length, width and height, and weighs 5,500 kg (12,125 lb). Add clearance for the chip conveyor, door opening and maintenance access.
The Puma 2600SY is a 10 in machine with a Y-axis, a 12-station turret and 599 N·m (442 ft-lb) at up to 4,000 rpm. The Puma GT 3100 has a 12 in chuck, 1,613 N·m (1,190 ft-lb) at up to 2,800 rpm and a 10-station turret on two axes.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.