The Ermak EPL 3/5 Axis Plasma 2060 is an industrial-grade 5-Axis Machining Centers powered by the Standard CNC. and a 5-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Ermak EPL 3/5 Axis Plasma 2060: 2,000 x 6,000 mm cutting area, Hypertherm HPR130XD, 1 to 38 mm capacity, 20 m/min, 8,150 kg.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Ermak (International) |
| Machine Type | 5-Axis Machining Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 5-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 8,150 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Cutting Width | 2,000 mm (78.7 in) |
| Cutting Length | 6,000 mm (236.2 in) |
| Total Width | 4,700 mm (185 in) |
| Total Height | 2,280 mm (89.8 in) |
| Torch Distance | 300 mm (11.8 in) |
| Table Height | 750 mm (29.5 in) |
| Max Speed | 20 m/min |
| Machine Axes | X, Y, Z, A, B |
| Repeatability | ±0.05 mm (DIN 28206) |
| Torch Height Control | Ermak THC |
| Cutting Capacity | 1 - 38 mm (0.04 - 1.5 in) |
| Power Requirement | 400V, 50Hz, 6 Bar Air |
| Machine Weight | 8,150 kg (17,967 lb) |
According to secondary market equipment benchmarks for November 2026, the Ermak EPL 3/5 Axis Plasma 2060 is estimated between $124,500 and $255,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $1,930 / month.
Plate up to 2,000 mm (78.7 in) wide and 6,000 mm (236.2 in) long, from 1 to 38 mm thick according to the table, using a Hypertherm HPR130XD plasma unit.
Only with an option. Ermak lists plate and pipe configurations for the EPL series that cut pipes with a diameter of 50 - 400 mm; the standard machine is a plate cutter.
8,150 kg (17,967 lb). The twelve-metre EPL 3/5 Axis Plasma 20120 on the same 4,700 mm gantry width weighs 13,550 kg.
The standard return feature lets the operator move the machine away and then return to the last point where cutting was stopped. A point laser light, also standard, shows where the torch is.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.