The Ermak EPL 3/5 Axis Plasma 4060 is an industrial-grade 5-Axis Machining Centers powered by the Standard CNC. and a 5-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Ermak EPL 3/5 Axis Plasma 4060: 4,000 x 6,000 mm cutting area, Hypertherm HPR130XD, 1 to 38 mm, 20 m/min traverse, 13,400 kg.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Ermak (International) |
| Machine Type | 5-Axis Machining Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 5-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 13,400 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Cutting Width | 4,000 mm (157.5 in) |
| Cutting Length | 6,000 mm (236.2 in) |
| Total Width | 6,400 mm (252 in) |
| Total Height | 2,280 mm (89.8 in) |
| Torch Distance | 300 mm (11.8 in) |
| Table Height | 750 mm (29.5 in) |
| Max Speed | 20 m/min |
| Machine Axes | X, Y, Z, A, B |
| Repeatability | ±0.05 mm (DIN 28206) |
| Torch Height Control | Ermak THC |
| Cutting Capacity | 1 - 38 mm (0.04 - 1.5 in) |
| Power Requirement | 400V, 50Hz, 6 Bar Air |
| Machine Weight | 13,400 kg (29,541 lb) |
According to secondary market equipment benchmarks for November 2026, the Ermak EPL 3/5 Axis Plasma 4060 is estimated between $125,500 and $256,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $1,945 / month.
4,000 mm (157.5 in), over a cutting length of 6,000 mm (236.2 in). The gantry's total width is 6,400 mm (252 in).
The table gives 13,400 kg (29,541 lb) for this model and 9,950 kg for the EPL 3/5 Axis Plasma 3060. Ermak does not break the figure down; the longer bridge and wider table are the visible differences.
Yes, the EPL 3/5 Axis Plasma 40120 keeps the 4,000 mm width and has a 12,000 mm cutting length, at a weight of 23,500 kg.
The Hypertherm HPR130XD in the table is listed with a cutting capacity of 1 to 38 mm. Torch height is controlled by the Ermak THC.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.