The Ermak Falcon Bend 4100/175 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Ermak Falcon Bend 4100/175 press brake: 4100 mm (161 in) bending length, 175 Ton (193 tons), 3600 mm between columns, 15 kW motor, 11250 kg.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Ermak (International) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 11,250 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Bending Length | 4100 mm (161 in) |
| Bending Power | 175 Ton (193 tons) |
| Distance Between Columns | 3600 mm (141.7 in) |
| Y Rapid Speed | 180 mm/s (7.09 inch/s) |
| Y Working Speed | 10 mm/s (0.39 inch/s) |
| Y Return Speed | 135 mm/s (5.31 inch/s) |
| Crowning | Motorized |
| Travel In X Axis | 800 mm (31.5 in) |
| Speed Of X Axis | 500 mm/s (19.7 inch/s) |
| Travel Of R Axis | 250 mm (9.8 in) |
| Speed Of R Axis | 350 mm/s (13.8 inch/s) |
| Backgauge Finger Blocks | 2 |
| Number Of Sheet Support | 2 |
| Oil Capacity | 200 lt. (52.8 us gallons) |
| Motor Power | 15 kW (20.1 hp) |
| Stroke | 275 mm (10.8 in) |
| Daylight | 550 mm (21.7 in) |
| Throat Depth | 410 mm (16.1 in) |
| Table Height | 900 mm (35.4 in) |
| Table Width | 90 mm (3.54 in) |
| Length | 6080 mm (239.4 in) |
| Height | 2680 mm (105.5 in) |
| Width | 2200 mm (86.6 in) |
| Machine Weight | 11250 kg (24806 lb) |
According to secondary market equipment benchmarks for November 2026, the Ermak Falcon Bend 4100/175 is estimated between $44,000 and $79,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $682 / month.
The distance between the columns is 3600 mm (141.7 in). Parts up to that length can go through the frame. Longer parts, up to the 4100 mm (161 in) bending length, are limited by the 410 mm (16.1 in) throat depth.
According to secondary market equipment benchmarks for November 2026, the Ermak Falcon Bend 4100/175 is estimated between $44,000 and $79,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $682 / month.
Y rapid speed is 180 mm/s (7.09 inch/s), working speed is 10 mm/s (0.39 inch/s) and return speed is 135 mm/s (5.31 inch/s). The stroke is 275 mm (10.8 in) with 550 mm (21.7 in) of daylight.
Largely, with more power. The Falcon Bend 3100-135 has 3100 mm (122 in), 135 Ton (149 tons), an 11 kW (14.8 hp) motor and weighs 8186 kg (18050 lb). The 4100/175 adds bending length and tonnage and uses a 15 kW (20.1 hp) motor. Both share the 275 mm stroke, 550 mm daylight, 410 mm throat and the same backgauge travels and speeds.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.