The Ermak Power-Bend Falcon 1270-40 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Ermak Power-Bend Falcon 1270-40 press brake: 1,270 mm bending length, 40 Ton, 170 mm stroke, 350 mm throat, 5.5 kW motor, 3,220 kg.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Ermak (International) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | 500 mm |
| Y-Axis Travel | 0 mm |
| Z-Axis Travel | 0 mm |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 3,220 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Bending Length | 1,270 mm (50 in) |
| Bending Power | 40 Ton (44 US tons) |
| Distance Between Columns | 1,050 mm (41.3 in) |
| Y Rapid Speed | 140 mm/s (5.51 in/s) |
| Y Working Speed | 10 mm/s (0.39 in/s) |
| Y Return Speed | 170 mm/s (6.69 in/s) |
| X Axis Travel | 500 mm (19.7 in) |
| X Axis Speed | 500 mm/s (19.69 in/s) |
| R Axis Travel | 250 mm (9.8 in) |
| R Axis Speed | 350 mm/s (13.78 in/s) |
| Backgauge Finger Blocks | 2 |
| Sheet Supports | 2 |
| Oil Capacity | 80 L (21.1 US gal) |
| Motor Power | 5.5 kW (7.4 hp) |
| Stroke | 170 mm (6.7 in) |
| Daylight | 387 mm (15.2 in) |
| Throat Depth | 350 mm (13.8 in) |
| Table Height | 850 mm (33.5 in) |
| Table Width | 90 mm (3.5 in) |
| Length | 2,750 mm (108.3 in) |
| Height | 2,155 mm (84.8 in) |
| Width | 2,010 mm (79.1 in) |
| Machine Weight | 3,220 kg (7,099 lb) |
According to secondary market equipment benchmarks for November 2026, the Ermak Power-Bend Falcon 1270-40 is estimated between $48,000 and $85,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $744 / month.
It is 2,750 mm long, 2,010 mm wide and 2,155 mm high, and weighs 3,220 kg. The working table is 850 mm above the floor and 90 mm wide.
Ermak's table prints a dash in the crowning column for this size, while longer Falcons are listed as Motorized. Confirm with Ermak whether any crowning is supplied on the 1,270 mm bed.
The ram stroke is 170 mm inside 387 mm of daylight. Punch, die and the flanges already bent on the part all have to fit in that opening, so tall tools leave little room for deep parts.
Ermak lists four as standard: Y1, Y2, X and R. The X axis of the backgauge travels 500 mm and the R axis 250 mm. Linear rulers on the top beam keep Y1 and Y2 synchronised.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.