The Ermak Power-Bend Falcon 2600-100 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Ermak Power-Bend Falcon 2600-100: 100 Ton over 2,600 mm, 800 mm X-axis travel, 200 mm/s approach, 7.5 kW motor, 6,273 kg.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Ermak (International) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | 800 mm |
| Y-Axis Travel | 0 mm |
| Z-Axis Travel | 0 mm |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 6,273 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Bending Length | 2,600 mm (102.4 in) |
| Bending Power | 100 Ton (110 US tons) |
| Distance Between Columns | 2,200 mm (86.6 in) |
| Y Rapid Speed | 200 mm/s (7.87 in/s) |
| Y Working Speed | 9.5 mm/s (0.37 in/s) |
| Y Return Speed | 155 mm/s (6.1 in/s) |
| Crowning | Motorized |
| X Axis Travel | 800 mm (31.5 in) |
| X Axis Speed | 500 mm/s (19.69 in/s) |
| R Axis Travel | 250 mm (9.8 in) |
| R Axis Speed | 350 mm/s (13.78 in/s) |
| Backgauge Finger Blocks | 2 |
| Sheet Supports | 2 |
| Oil Capacity | 150 L (39.6 US gal) |
| Motor Power | 7.5 kW (10.1 hp) |
| Stroke | 275 mm (10.8 in) |
| Daylight | 530 mm (20.9 in) |
| Throat Depth | 410 mm (16.1 in) |
| Table Height | 900 mm (35.4 in) |
| Table Width | 90 mm (3.5 in) |
| Length | 4,350 mm (171.3 in) |
| Height | 2,550 mm (100.4 in) |
| Width | 2,500 mm (98.4 in) |
| Machine Weight | 6,273 kg (13,829 lb) |
According to secondary market equipment benchmarks for November 2026, the Ermak Power-Bend Falcon 2600-100 is estimated between $50,500 and $89,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $783 / month.
The Power-Bend Falcon 2600-100 has 800 mm of X travel instead of the 500 mm of the Power-Bend Falcon 2600-60, a 9.5 mm/s working speed and a 155 mm/s return. Motor power stays at 7.5 kW and oil capacity at 150 L.
6,273 kg. The machine measures 4,350 mm in length, 2,500 mm in width and 2,550 mm in height, which is worth checking against door openings and crane capacity before delivery.
Hardly. The difference from 10 mm/s is small and affects only the bending part of the stroke. The 200 mm/s approach and 155 mm/s return decide most of the cycle time.
By linear rulers on the top beam. Ermak states a synchronisation tolerance of 0.01 for the Y1 and Y2 axes, both of which are CNC axes as standard.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.